Recent content by BruceK

If the engine(s) are running when the blowers are, and voltage drops to 11 the alternators do not provide the amps being consumed. It should be a simple pass through. Or is this a prestart safety procedure for gas engines? If so a brief period of associated voltage drop might be ok and to be...

Seeking advice is good, don`t worry about thread location. I had peripheral neuropathy in the lower legs briefly, due to a rare antibiotic reaction. I was quickly at the neurologists,(no ankle or knee jerks)narrowly escaping hospitalization in case it was the start of Gillian Barre. A disturbing...

Didn`t our late member FF have one of those? Great interior fitout.

There are sit on type kayaks sold as fishing kayaks which are wider, more stable, but still single hull. My partner chose one, it`s not noticeably slower or any less maneuverable. BTW Maritimo CEO Tom Barry Cotter "resigned" "because "the shareholders wanted to proceed in a different direction"...

But consider the dental consequences of the 5c candy bars. New heat exchanger for the 7KW Onan cost just short of 2K AUD. Ouch.

I had Lehmans in a previous boat. They silt up, impeding coolant movement, around no.6 especially but there could be other causes. I had mine flushed when temps rose. I recall other stories of this issue on TF but not of a fix in situ. My recollection is the problem ended up more extensive. But...

This is Roberta Flack`s weirdly named "Uh Uh Ooh Ooh Look Out (Here it Comes)" Not so weird, it`s the tale of a dumping phone call. Well sung, superbly backed by some good people, and tuneful too. I saw this comment about the personnel on the track;" In this gem plays no more and no less than...

Unremarkable. Usual marina requirement here is 10M.

Unfortunately photo does not depict crack. Suggest you research JB Weld 2 part epoxy, I used it to repair a plastic part on an outboard fuel system. Works for most plastics, and it`s charcoal in color. You may need light clamping while it sets.

There are multiple core materials. My previous 1981 Island Gypsy, in many ways a GB clone, had (original) foam cored decks. You`ll be lucky if yours are, but it`s not likely.

My home dehumidifier sized for a large room is effective but does raise room temperature. In our climate we don`t need one on the boat.

Cockpit winches are a great idea for your locking needs. The lack of locks here suggests Maritimo may not have had them in mind for design purposes, check the strength of the mounting area and space to for a backing plate. I suggest sending Maritimo an email to ask their advice on location etc.

If water is entering between the acrylic glass and the frame, it should be possible to seal the gap between the two without removing the glass. A hatch leak which when I bought my boat had destroyed a sliding timber "blind" under it, all I had to do was reseal between glass and frame ( and...

"Affected" is way better than zapped to death. Looks like yours are somehow self protecting.