Search results

My 2003 pilot 34 is dark green, does anyone know the color code for this color? I am assuming the boat came from the factory painted with awlgrip, but I may be wrong.

We have a Kha Shing 40 badly damaged on the top, radar arch demolished, sundeck roof pushed to the side, all rails smashed, much fibreglass damage. As the hull is aparently undamaged, I am wondering if there is another Kha Shing 40 with the opposite problem, ie the hull wrecked but the upper...

Guess what else needs bonding... this from our stuffing box.

Hi all, seems the wheels are coming off the companionway door on my '03 34 pilot. Anyone know what they look like, where to get them, and how to change them? Thx, Rod

The front center window surround is aluminum, which has paint peeling off. Has anyone refinished theirs, if so how, and is it possible to remove the whole unit? Thanks, Rod, Brava

I have an 03 34 pilot that seems to have a leak that can only be coming from the hull-deck joint. How is this joint made, is it bolted under the rub rail, or just glued? Rod Brava

I have a 2003 34 pilot I need a cover gasket for, can't find any numbers on anything, I wish Perco was better at identifying their stuff, any one know the part munber for the gasket?

Want to buy Cetrek 715 hand held unit for parts, dead or alive.

It seems my rudder is bent, probably the bottom pin(tle). So I have to remove the rudder, has anyone done this? If I jack up the rudder, it doesn't clear the bottom skeg, can probably force the skeg down, then would probably have to unbolt the whole stuffing box so I can pull the rudder to one...

Have Yanmar 6 cyl 6LYA STP, anyone know which micron rating I should be using for the Racor? It has 2 micron now, seems pretty fine, asking to plug? Rod

My 2003 34 Pilot has a ZF transmission that calls for SD, SE, SF oil, which is not available, what are people using? Rod Munro, Brava 1

Our 2003 34 Pilot is showing as if it needs paint on parts of the hard top sides. Is this paint or gelcoat, and what could I use to freshen it up? Rod Munro, Brava

My rudder is really stiff turning to port on my 2003 pilot 34. I disconnected the cylinder, and it is the rudder, not the hydraulics. I assume the rudder post is bent. Has anyone removed their rudder? Can I do it without removing the shoe? Interesting there is nothing holding the rudder down...

Saw an older pilot 34 with a stainless piece covering the stem from the waterline to the deck. I wonder where I could find one? I want to brace the bow sprit as it flexes when hoisting the anchor and attaching a brace to a stainless piece would be easy.

Took out the rusty, moldy ice maker under the admiral's seat, anyone found a hatch that will cover the hole? Rod

Having trouble with this site, bear with me pls if this ends up in the wrong place. Have 2003 Mainship Pilot 34 with Onan 5KW genset with enclosure. Insulation coming off the inside of the genset enclosure, so I need to move the genset to take off the covers on the stbd side and aft. Found...

I have a 2003 Pilot 34, want to remove Onan 5 KW genset. Can't take off stbd or aft cover to see how it is screwed down (inaccessible), has anyone done this, where are screws that hold it down? Thanks

We have a 1987 Kha Shing, 40 ft, has two six inch strainers, need gaskets for them, they have a sail cast into the top, they are bronze, anyone know where to get seals, or what mfg these are?