Search results

Gen 3 is not available in Mexico yet. not sure when it will be. I am planning to buy my starlink in Mexico within the next month or so. my question is, can i later buy gen 4 hardware in the US and replace the hardware only and continue my Mexican service plan? Thanks

looking for a dentist recommendations for crowns etc. in La Paz Thanks in advance.

I bought a set of paravanes from a commercial fisherman next to my boat. It was a good buy and I am glad I did. I installed and tasted them on the water for three days and they exceeded my expectations. On the fourth day otw to kodiak one bent 90 degrees. Not fun until I was able to get some...

If I am able to get starlink in Mexico and have it shipped there. How long will it work after I enter back to US states?

I have a joystick type setup with an AP reversable pump. it's a home made setup for my emergency outboard and it works great. I would like to add an autopilot to the mix using the same pump. How to I make sure they don't interfere with each other. only need use one or the other. I thought if...

i have just finished installing the paravanes on my boat. tested them in some 5-6' at 5 seconds conditions. run for about 12 hours and am totally impressed with how much they helped. I am stoked. now for the question. i don't mind leaving them as is at anchor or would it make a big difference...

the pipe that supports the main boom i think its called stay. should i mount it forward or aft? i can do either. mounting forward means the pressure will be pulling and mounting it aft means pressure will be pushing on the stays. any pros or cons for either?

Ill be in La Paz a couple of days before and after Christmas. would love to join and boating community activities and meet some of the members on this forum. Thanks

does anyone have information regarding self insuring your own vessel. Mainly for marina requirements with around 300K lability.

https://www.adn.com/business-economy/2022/06/03/old-alaska-ferry-malaspina-sold-in-bid-to-keep-it-out-of-the-scrapyard/ could it be the market is turning? I bet the fuel in it is worth the buying price.

looking for ideas for indoor dining chairs with arm rests. comfort is a big plus. my boat can roll pretty good. should i get heavy ones or light ones that can just fall over without causing damage.

looking for a reasonably priced solution for checking structure ahead of the boat while anchoring etc. there seems to be new advancements specifically with https://www.lowrance.com/lowrance/type/sonar-transducers/activetarget/ in scout mode. transducer may be lowered down and pointed forward...

I have a few 6V batteries in the lazarette and it's not heated. Boat is stored on the hard in South central Alaska. Not too cold in Alaskan standards. some say they can freeze others say should be no problem if batts are fully charged. Not sure i can remedy the situation this winter. I am...

need a simple solution for hydraulic steering. My thoughts.... Reversing auto pilot pump and homemade reservoir of some kind. Reversing momentary switch. right/left off Am I missing anything?

What are the options if any on adding gas to diesel to make a few more miles. any percentage mix that are acceptable and or addling ATF or something like that to the mix.

my question is about HP required to move the boat at 4-5 kts I have seen threads that discussed this before pros cons etc. i am aware of all that. I am debating whether the 60HP high trust versions will be enough or i need to go to a 90 or even 115HP any choice will end up swinging the same...

I have four 200 gal tanks all same dimension and are installed level. a supply manifold and a valve for each tank and a return manifold with a valve for each. i normally run from and to the same tank one valve open on each manifold. Any reason not to open all four valves and let tanks...

I fount out the cold plate system on my boat is 24V and its the only 24V appliance I have. It looks like the PO connected it to the 3rd 8V batt producing 24V while all four are connected for the rest of the 32V stuff and being charged as 32V. Any issues with that?

I have been experimenting with the 100% silicone roof paint for different applications. it seems like amazing stuff. I am thinking of doing the bottom of my wood planked boat. a good idea? Would barnacles kelp etc stick to silicone? Would bottom paint stick to silicone?

I am looking for some innovative FI mounts for variety of FI sizes. I do not like to store them in cabinets I prefer to have them hung and visible. I don't seem to like the mounts they usually come with for a variety of reasons. Does anyone have some clever and effective mounts? BTW prefer...

say I have a 40x15 barge and an trying to move it with outboards. my question is specifically for maneuverability. option 1: two outboards in the 60HP hi trust types without steering. Use forward/reverse of each engine to control turns etc. Option 2: one 150Hp outboard with steering, Normal...

I know deep cycle are not made for cranking although i believe they got some cranking amps. Batt mfg don't seem to share that spec for deep cycle. I was also wondering whether the AGM version of the 6V has more cranking amps then the comparable flooded.

I have a 12V breaker label DECCA by the PO. cant seem to follow wires and don't know what its for. any ideas?

I currently have two banks of 32V system 8V x 4 on each side. One side is good to start the engine with no issues the other needs replacement and I am not sure I like these 8vs plus they are getting hard to find. Ill like to use one side for house. here are the options using 6Vs 5XC6v for...

I am all for the Navy doing its thing although not sure this test was required. https://www.dw.com/en/us-navy-tests-aircraft-carrier-with-huge-explosion/a-57976215