Search results

Looking for lights to use on an inflatable. This is an AB 9.5 ft. would like position lights and all round or tri. Something water proof and easily mounted. Can't find anything. Presently using all round worn on my head, works well but no position lights. Any thoughts. Ken

Ok, my last thread delt with repair generator or go inverter and larger house bank with solar. I decided to go with generator and add some solar (330 Watts. ) So now the question is do I repair the Generator or replace with another and what type. The Westerbeke has 960 hours on it. The Diesel...

I appears to be part of the bonding system. I have been lead to believe there is no way to clean the pores after it has been painted. It definately is not part of a ground plane for SSB antenna. I have thought of putting a ham rig in and would then use that as a ground plane. As far as lightning...

I have a 6 x18 dynaplate on a trawler that sometime in the past was painted. Supposedly rendering it useless. I sanded the paint off it and left it attached knowing the sanding is not supposed to correct the painting. I have not noticed any adverse effects but then again would I recognize them...

Tanks guys. I guess I already knew this just hoped I would hear something diffrtent.

I have a trawler 36 ft. In it is a 5kw westerbeke generator with about 300 hours. It is about 10 years old. The diesel runs fine but the generator has quit. Did some smoking but have not been able to accurately check windings or electronics. On board we also have electric stove microwave and hot...

I am considering adding paravane stabilizers to a 36 ft Gulfstar trawler. Has anyone have any info regarding a designer or experience with another type of stabalizer on this size vessel? Ken

Thanks DGB for the info. A lot of the specs are the same as the Gulfstar. I have in the past had similar discussions regarding the rolling. There have been many suggestions regarding make and model. What I find is those mentioned have some sort of stabalizing device. Just discovered the military...

This weekend I changed my starting battery from a 27 to 31 series. Yes the 27 started both perkins 4-154 engines but I had to bleed the engines after changing fuel filters. Te 27 series did not have enough energy to turn over even one engine long enough to bleed the engine. I needed from 850 to...

I see that the MT still has a ladder from the swim platform. How are the side decks for walking room? I believe it is a full displacement hull but how is it different from the Gulfstar. I have a 13 ft beam, is full displacement and weighs about 18,000 lbs empty. Full keel that is supposed to be...

We presently have a 36 ft Gulfstar. We have owned it for 9 years and it has been a nice boat needing usual maintenance and repairs. We want to switch to another trawler. Why? Well, we want something with a walk onto the rear deck from the swim platform. Presently we have to walk up a ladder to...

I presently have a 5kw Westerbeke genset. I do not know how old it is but I do know it is of the new style and has only about 300 hrs on it. The engine runs well but the back end (generator) has quit. To repair and or replace the back end is going to require pulling up the floor. The unit has a...

I have legal lighting I have the legal lighting. I was questioning the legality of adding a tricolor. Jim, I like your anchor light. I tried West Marine, Defender and Go2marine. Changing to LED bulbs has never worked for me. Thisis a 75 trawler and probably can use a new fixture. Ken

My anchor light is and old style incandescent. Not very bright and a power hog. It is mounted on top of my mast on a trawler. I seem to be able to find led tricolor light with anchor light only. Can I run both the tricolor and mast head light at the same time and be within the regs? Ken PS i am...

Thanks for the help. I did solve the issue. It was me. When i mounted the mfd back into the boat after winter storage, I plugged the nema 2000 cable into the wrong port. Both ports use a 5 pin connector. Correct connection and updated software, autopilot works perfectly. Now, on to the genset...

I installed a Garmin autopilot. MFD, and radar all Garmin and all worked well for two years. Now I get an error regarding autopilot lost gps speed. Boat will not follow course wanders. I believe this is because of speed loss.. I do see gps speed on mfd . My bet it has an internal antenna and not...

I have a Gulfstar that came without rollers. it simply slid in the track. The bottom of the track started to wear so I put a coat of epoxy in the track. Then I machined slots in the door and installed rollers. The problem is it slides too easily and unless latched rolls back and forth while...

I have purchased two electric twin horn style horns. After a two or three year use each has quit. Called the manufacturer and they told me how to open them and adjust. Can’t seem to get them to work. I like the sound when they work. I read recently that if the voltage dropped slightly people...

I am replacing the impellers on my trawler. to fo this you need to remove the raw water pumps. to remove the pumps you must disconnect the hoses. the hoses are very stiff and wire wrapped. So I believe the only way to remove them is cut them off. This is fine while in port but not so fine if...

I have a 5 KW westerbeke genset that stopped producing power last spring. The diesel runs fine. I see smoke when run. I do not smell or see burnt wires nor do I find a short to ground when testing the rotor and windings. I was told it did not smoke when the switch is turned off. Checked switch...

Hi Richard, You are the guy I would like to speak to. We are looking at the 37 ft NT. I have a number of questions. Our cruising is generally on the coast of Maine. Quite similar to the areas you have mentioned. If you would send me your number and when best to reach you I will call you or you...

Looking for some thoughts and possible experiences. For the last 9 years we have owned a 36 ft Gulfstar trawler. Cruise about 6 to 7 knots twin 65 hp diesels and one 5kw westerbek genset. It was built in 1975 and has been a good boat. Good bones basic maintenance. We have traveled the entire...

SEAdog AK I would love to see how they are plumbed. Thanks, Ken

We don't have AC but the hot water could be a problem. I have old perkins engines also and not sure how to plumb the hot water. I am thinking of changing the stove to propane but the propane locker placement could be a problem. Probably keep generator and add solar panels for when we are not on...

The other day my 5kw Westerbeke gen set stopped making AC. The gen set is in a sound case and a 3 ft gulfstar trawler. What I am getting at is it takes up a fair amount of space in the engine compartment. Quick diagnosis shows one coil on the stationary side reads .5 ohms and the other .2. I...