jefndeb
Guru
Maretron EMS100 Analog Engine Monitoring - NMEA 2000 System & Yanmar Harness Kit
Package includes-
1 Maretron EMS100 Converter Module
1 Yanmar Interface Harness Part Number: EMSYRM01
1 Yanmar 4M Extention Wire Harness Part Number: 129574-77710
1 Maretron Installation & User Manual
EMS100 System Description-
Maretron's EMS100 connects into engine wiring harnesses and converts analog signals such as water temperature and oil pressure to the new marine digital interface NMEA 2000. Engine data is then distributed throughout the vessel over a single cable where it can be monitored by any NMEA 2000 compatible display.
The EMS100 supports these engines-
Yanmar GM Series
Yanmar YM Series
Yanmar JH Series
Yanmar LH Series
Yanmar LP Series
Yanmar LY Series
This EMS100 is compatible with existing instrument panels and key switches so you don't need to remove them while upgrading to newer digital technology. For new installations, the EMS100 and a compatible NMEA 2000 display can replace the traditional analog instrument panel.
Yanmar Harness Maretron Part Number: EMSYRM01
This EMS100 wire harness connects between the engine and instrument panel. Most modern Yanmar engines use the rectangular Yazaki connector, but you should verify the type of connector prior to considering purchasing this EMS100 or associated wiring harness.
Also included is a Yanmar 4M Extention Wire Harness Part Number: 129574-77710 (JH, LH, LY Series)
This harness may or may not be needed for your installation but is included.
This kit is being sold as used but show minimum signs of any use, was an open box item, it does not show any signs of ever being installed....
Note - Kit was still in the original box but was no longer serviceable for shipping and was discarded.
Price is $485.00 shipped via USPS
Payment via Paypal
Thanks for looking
Package includes-
1 Maretron EMS100 Converter Module
1 Yanmar Interface Harness Part Number: EMSYRM01
1 Yanmar 4M Extention Wire Harness Part Number: 129574-77710
1 Maretron Installation & User Manual
EMS100 System Description-
Maretron's EMS100 connects into engine wiring harnesses and converts analog signals such as water temperature and oil pressure to the new marine digital interface NMEA 2000. Engine data is then distributed throughout the vessel over a single cable where it can be monitored by any NMEA 2000 compatible display.
The EMS100 supports these engines-
Yanmar GM Series
Yanmar YM Series
Yanmar JH Series
Yanmar LH Series
Yanmar LP Series
Yanmar LY Series
This EMS100 is compatible with existing instrument panels and key switches so you don't need to remove them while upgrading to newer digital technology. For new installations, the EMS100 and a compatible NMEA 2000 display can replace the traditional analog instrument panel.
Yanmar Harness Maretron Part Number: EMSYRM01
This EMS100 wire harness connects between the engine and instrument panel. Most modern Yanmar engines use the rectangular Yazaki connector, but you should verify the type of connector prior to considering purchasing this EMS100 or associated wiring harness.
Also included is a Yanmar 4M Extention Wire Harness Part Number: 129574-77710 (JH, LH, LY Series)
This harness may or may not be needed for your installation but is included.
This kit is being sold as used but show minimum signs of any use, was an open box item, it does not show any signs of ever being installed....
Note - Kit was still in the original box but was no longer serviceable for shipping and was discarded.
Price is $485.00 shipped via USPS
Payment via Paypal
Thanks for looking
Attachments
-
yanmar11.jpg96.9 KB · Views: 111
-
$_57 (64).jpg101.6 KB · Views: 114
-
$_57 (65).jpg124.4 KB · Views: 100
-
$_57 (67).jpg120.7 KB · Views: 98
-
$_57 (68).jpg76.4 KB · Views: 97
-
$_57 (69).jpg71 KB · Views: 114
-
emsyrm01__67640 (1).jpg27.4 KB · Views: 119
-
$_57 (71).jpg18.6 KB · Views: 109
-
$_57 (70).jpg87.7 KB · Views: 99