The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
See posts with no answers
2016 03 04 LazaretteHatch 001 Fiberglass roving in epoxy and a lamina of 1/2" end grain Balsa. Ballasted with 2 1/2lb lead ingots for clamping and m
2016 03 07 LazaretteHatch The ballast locates a dam against which to pour filler to bring the bottom of the hatch down to the correct thickness.
2016 03 05 LazaretteHatch 003 Laminating the bottom skin, fiberglas roving in epoxy. The spring stick and the ballast force the perimeter tight to t
2016 03 05 LazaretteHatch 001 The finished core.
2016 03 04 LazaretteHatch 001 Fiberglass roving in epoxy and a lamina of 1/2" end grain Balsa. Ballasted with 2 1/2lb lead ingots for clamping and m
2016 03 03 LazaretteHatch 003 Patching the underside of the Teak
2016 03 03 LazaretteHatch 002 Dutchmen at hinge positions
2016 02 26 LazaretteHatch 002 A jig to maintain the teak flat and in place.
DHeckrotte

2016 03 04 LazaretteHatch 001 Fiberglass roving in epoxy and a lamina of 1/2" end grain Balsa. Ballasted with 2 1/2lb lead ingots for clamping and m

There are no comments to display.

Media information

Album
Rebuilding the Lazarette hatch
Added by
DHeckrotte
Date added
View count
52
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top Bottom