The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.

See posts with no answers

Here are a bunch of edge banding pieces I'll use to make the final measurements.

I nailed down small pieces of wood to guide the edge of the vibrator. Then I sanded it with my small belt sander but try to get a picture of that.

Using the plug sides as a guide, I marked the new cut lines for the hole. Since i got it mostly right the first time, the new cuts were very small an

With the plug back in the hole, I lined up the teak and holly. Since I squared the plug it didn't line up with the sides of the hole so lined up it l

Here are a bunch of edge banding pieces I'll use to make the final measurements.

Triming some white oak to band the edges of the hatch. I used oak because it's a hardwood and will not tear up to much with continued use of the hatc

This is a picture of the plug being squared. I'm not a cabinetmaker so first cuts are close but not spot on. A tablesaw makes this easy for the plug

Just an end view showing the new thickness.

Here are a bunch of edge banding pieces I'll use to make the final measurements.

Lollygag
Sep 5, 2014

There are no comments to display.