The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
See posts with no answers
The panels and other trim components from the forepeak being stained to regain color and urethaned.
Ready for sanding, staining, and finish. These panels were coated out on back and edges with epoxy so that they will not again be affected by water.
Clamping and gluing.
The panel from the head was in terrible condition. (The head port opens and apparently had been left open occasionally.) That's the inner face venee
The panels and other trim components from the forepeak being stained to regain color and urethaned.
Clamping and gluing. The port cutout was very handy. Otherwise, I'd have had to ballast the stack of glued veneers.
Work in progress.
The last veneer layer.
DHeckrotte

The panels and other trim components from the forepeak being stained to regain color and urethaned.

There are no comments to display.

Media information

Album
Veneer Panel Repair
Added by
DHeckrotte
Date added
View count
73
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top Bottom