Navigation

Browse albums

Media added by Lollygag

The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
See posts with no answers
This is the old panel laid over the rough cut of the new panel. It came out close but not exact.

This is the old panel laid over the rough cut of the new panel. It came out close but not exact.

  • 0
  • 0
I failed miserably using the binding feeder. It does a good job but somehow I kept getting out of sync and had to do repairs that are now obvious. (

I failed miserably using the binding feeder. It does a good job but somehow I kept getting out of sync and had to do repairs that are now obvious. (

  • 0
  • 0
When I was as close as I was going to get, I stitched the outside edges to hold them together. You can sew right over the staples (I try to avoid the

When I was as close as I was going to get, I stitched the outside edges to hold them together. You can sew right over the staples (I try to avoid the

  • 0
  • 0
My trusty LSZ-1 set up on two 6' folding tables. This gave me a large enough surface to work easily. I have also set it up on the table in the sailb

My trusty LSZ-1 set up on two 6' folding tables. This gave me a large enough surface to work easily. I have also set it up on the table in the sailb

  • 0
  • 0
I backed the panel with cut pieces and used double edge tape at the center hold them. I stapled the outside since I cut it large so I can mark the fi

I backed the panel with cut pieces and used double edge tape at the center hold them. I stapled the outside since I cut it large so I can mark the fi

  • 0
  • 0
Checking the new panel with the old.

Checking the new panel with the old.

  • 0
  • 0
Cutting out the new panel. I used Sailrite's 24oz boat topping.

Cutting out the new panel. I used Sailrite's 24oz boat topping.

  • 0
  • 0
I laid the vinyl (removed from old panel) on the new panel to make sure I got it right. (Well, I got it close)

I laid the vinyl (removed from old panel) on the new panel to make sure I got it right. (Well, I got it close)

  • 0
  • 0
20151008 175930[1]

20151008 175930[1]

  • 0
  • 0
20151009 153604[1]

20151009 153604[1]

  • 0
  • 0
20151009 143744[1]

20151009 143744[1]

  • 0
  • 0
20151008 175930[1]

20151008 175930[1]

  • 0
  • 0
20151009 153604[1]

20151009 153604[1]

  • 0
  • 0
20151009 143744[1]

20151009 143744[1]

  • 0
  • 0
Tranny heat exchanger 3

Tranny heat exchanger 3

  • 0
  • 0
tranny heat exchanger 2

tranny heat exchanger 2

  • 0
  • 0
tranny heat exchanger

tranny heat exchanger

  • 0
  • 0
I didn't have time to go inside but the owner invited me back to take a tour. The view from his cabin has to be great but I wouldn't leave the delta

I didn't have time to go inside but the owner invited me back to take a tour. The view from his cabin has to be great but I wouldn't leave the delta

  • 0
  • 0
The side wheels are driven by a hydraulic hub and are on a swing arm raise them above the hull bottom

The side wheels are driven by a hydraulic hub and are on a swing arm raise them above the hull bottom

  • 0
  • 0
No kidding! A sidewheeler.

No kidding! A sidewheeler.

  • 0
  • 0
Bow landing platform

Bow landing platform

  • 0
  • 0
Stern looking forward

Stern looking forward

  • 0
  • 0
How do I connect these two? It seems the second brown wire from the float switch is redundant. Any clues?

How do I connect these two? It seems the second brown wire from the float switch is redundant. Any clues?

  • 0
  • 0
Here is a picture of the hatch with the spacer pieces, frame and hatch all in place, waiting for the glue and epoxy to set. You can see the waxed pap

Here is a picture of the hatch with the spacer pieces, frame and hatch all in place, waiting for the glue and epoxy to set. You can see the waxed pap

  • 0
  • 0
I think I busted a rib getting over that water heater. Still, this is so much better than the sailboat. I mean really, the hose has room to lie on t

I think I busted a rib getting over that water heater. Still, this is so much better than the sailboat. I mean really, the hose has room to lie on t

  • 0
  • 0
Back
Top Bottom