STB

Also, yes, it means waiting fornitntonsort of gel and get tacky. You can sort of see the change in the way it looks. If you don't mind...

Can you post a picture of your polisher?

I am wasteful and just throw away the tips for the cheap sprayer. The folks with the good, real sprayguns obviously clean and reuse...

Let me also comment on one more thing, but from scuttlebutt, not personal knowledge. I've never user an expensive gun to spray gelcoat...

I should also add that gelcoat does set up in a few minutes or so. If you are spraying pva over thinned, sprayed gelcoat you need to...

Great questions! Recall that when I, personally, spray a thin finish coat of gelcoat I used waxed gelcoat so I don't need to use PVA or...

I treat it like rattle can spray paint. I do immediate light overlapping passes, but I sort of consider than one coat. But, light is...

For what it is, that's as good a kit as any for doing it without a sprayer -- which is a perfectly viable option. I suspect you'd want...

Hi Paulga, I guess I can add that I've always made the most use of white, black, red, and yellow.

Looking at Total Boat's product, their instructions read, "Thin TotalBoat Gelcoat with styrene, only as needed (up to 15%, adding more...

Hey Paulga, They have kits that have a bunch of pigments. I've always used one of those. Total Boat or others may have more options...

Hey Steve, Out of the can, the viscosity is appropriate for application by brush or roller. It doesn't really flow out ridges to flat...

These things all, I think, come down to expectations. That won't get you to a perfect repair. But, if it gets you to a repair you are...

I, myself, don't really wet sand until the very end, but I may wash off the sand paper of it starts to get clogged. Start with a higher...

Don't forget: If filling with an epoxy-based filler, once it is fully cured, you need to wash the amine blush off the outside with soap...