Turtle Blues

As suggested above you may be able to find a repair facility that you can send them to if you want to stay with that gauge. My 2c...

Just the reversing valve itself is mounted next to the compressor. 2 pipes in the bottom 3 out the top, coil magnet on the end. The fan...

The relays should be commanded (energized) by the stat soft buttons below their status display. Fan on should be continuous, auto...

Need to look at wiring diagram, is it on the inside cover? Or logic diagram in owners manual. Generally 2 relays 1 for the fan and 1...

No, not in this instance. Transformer is a little high on output but the system should handle it. Glad you got it working, hopefully...

Next suggestion is post to the furunousaforum. It is pretty good, see what Johnny Electron has to say. Good Luck

What brand /model camera is in place now? Furunos I'm familiar with (TZ or Navnet) have standard analog rca video input. Nothing...

Understand frustration with $ amount. You can get the Sony CMOS 2.0 that the RM 210 is based on in any $50 outdoor camera. AFAIK the...

The SD 9001 (and various relabels) is only a single pole switch. OP needs a DP to use existing motor wires. I didn't seem to see one in...

Agree with KnotYet. Going down the rabbit hole trying to find something affordable isn't working. Is there any manufacturer numbers on...

Typing it is easy. Actually finding it is the problem. Just did a quick search and most are for the 3 wire setup. Will try some...

No, I just made a false assumption the other side of the switch would have different numbers. Premise is the same. They are single pole...

Your old switch was 2 dual pole push button switches breaking both black and white on each switch and reversing the output connections...

Shipyard workers and commercial insulators spent years in confined areas with airborne fibers so thick you could see the light...

I always liked the old school riggers bag. 1 for electrical, 1 for carpentry, 1 for mechanical. Used to buy the Harbor Freight knock off...