Bob Cofer's latest activity

What a great article!

Not sure if the paywall will keep you out, but there is a lovely story this morning in the on-line Seattle Times about the gorgeous Lord...

Update on the installation: The system is working great and a significant upgrade over the AGM's. One of the unintended consequences...

The Mini complains about not being tilted, however the worst I have seen from it is about 30 mb/s (when flat). If you have several 4K...

I have it mounted on the flybridge and it works in all areas of my boat. It's not a big boat but it goes through two decks and a...

Personally, I'm looking at the mini as an option. I couldn't care less about its wifi performance, as I wouldn't use it. I'd have it...

The Mini works quite well laid flat. Also it will operate on 12v whereas the G2&3 require 120v.

Yes, I plan to haul out at Colony Thank you for this. I'll give him a call.

We have used Stephen Hemry and Global Marine Surveyors, (425) 422-9592. He has extensive wooden vessel experience.

If it was me I'd stick with a traditional enamel topside paint instead of an LP or something like that. LP's are too shiny for a wood...

We bare wooded our GB above the waterline. One coat of primer then two coats of marine enamel, we used Kirby Paint Co white and GB...

Take a look at one of the Willard VEGA 30 models. Amazing amount legroom in the head. The door is on the sidewall, photo left

Likewise my Balmar M618 regulator stopped working. The battery sensor wire and fuse showed minimal ohms but when I used the trouble...

The Wi-Fi is pretty decent, I can pick it up from shoreside.

We just got back from a cruise up the the islands and it worked quite well. I just set it on the upper helm and never touched it again...