Comodave's latest activity

I have had good luck with Wema senders. As said above it doesn’t matter about engines.

I would pretty much take Rods opinions to the bank. He does great work. Marinehowto.com

I have had excellent support from Raymarine. I have had them in our last 4 or 5 boats. They replaced an 8+ year old depth sounder...

It should be fine there. The cooling water pump needs to be below the waterline since they aren’t self priming. The intake to the...

I believe that the vast majority of diesel boats have a Racor primary and then the engine manufacturer secondaries. I really like...

If you cruise at displacement mode you will get reasonable fuel economy. On plane it will be less than 1 MPG, but at displacement speed...

Glad you got it running.

Ok, what’s your point…

In the OP case I think I would remove the genset now while it is still relatively new and valuable. Batteries are getting much better...

If fuel isn’t coming out with the priming pump and the hose is disconnected at the secondaries then it could be the pickup tube in the...

If you don’t have a drain hose then check out sbmar.com.

What I do instead of whipping is use a hot knife to cut the line. I usually melt the line up the side about 1/2”. Alternately instead...

With nylon line I use a hot knife and melt the end so it doesn’t ravel or unlay.

Having an electric priming pump that doesn’t prime the secondary filter makes no sense. The purpose of an electric priming pump is to...

Too bad they may not be available. When we bo our 1998 Formula I asked them about some wiring details so they sent me about 100 pages...