In-hull transducer on Camano Trolll

The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.

pukeanddie

Veteran Member
Joined
Mar 25, 2015
Messages
28
Location
United States
Vessel Name
Ruffian
Vessel Make
Camano Troll
Does anyone have experience with in-hull transducers on a Camano troll? If so, any thoughts as to the best location? There is a space between the batteries and the muffler wet exhaust box that seems like a good spot...
 
  • Like
Reactions: TTT
My in-hull transducer to starboard of the raw water intake for A/C, and, of course, higher up on the slant of the hull. The mounting has leaded some mineral oil twice, but the unit works fine after repairing the leak. A benefit of this location is short cable, no meaningful additional heat from Exhaust, less vibration, and a smooth flow of water under that point on the hull. Having said that, it's just a simple two frequency transducer, not anything more elaborate. As usual, the manufacturer or an electronics specialist is a good source for more information.

Best wishes for Camano Cruising!
 
In 2005 we went to the Camano factory to see our new Camano being built. I asked that question and they told me they had just been experimenting with the location. They suggested I put it in the lazerette on the starboard side where the hull is not reinforced. It worked fine for the 9 years we had the boat.
 
I can't address that model but I've put shoot throughs in several boats. I take a zip lock bag of water, press it against the hull and press the 'ducer into that. Poke around till you find a spot that works.
 
Does anyone have experience with in-hull transducers on a Camano troll? If so, any thoughts as to the best location? There is a space between the batteries and the muffler wet exhaust box that seems like a good spot...
Hello, I did not have good luck with an in-hull transducer on my Camano and opted for a thru-hull. Has worked fine for many years.
 
My 2007 Camano 31 had an in-hull located in the lazarette on the starboard side, where the hull is not reinforced, at the time I acquired her four years ago. Still working great.
 
  • Like
Reactions: TTT
My 2007 Camano 31 had an in-hull located in the lazarette on the starboard side, where the hull is not reinforced, at the time I acquired her four years ago. Still working great.
Pictures of the mounted transducer?
 
Does anyone have experience with in-hull transducers on a Camano troll? If so, any thoughts as to the best location? There is a space between the batteries and the muffler wet exhaust box that seems like a good spot...

Lazarette, port side. It's out of the way and the relatively flat bottom and construction of hull in that area is conducive for an in-hull transducer. Really happy with it after five years. This was the recommended location of our marine electrician who installed it.
 
Back
Top Bottom