Greenline 33: General Discussion

The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.

ScottC

Guru
Joined
Nov 2, 2019
Messages
1,626
Location
SWEDEN
Vessel Name
ABsolutely FABulous
Vessel Make
Greenline 33 Hybrid (2010)
Now that we have a new, dedicated area for Greenline/Solar/Hybrid discussion, I thought I would start this thread with an eye toward aggregating Greenline 33 General discussion that does not fit in any of the existing threads. Hopefully, this will make it easier for those that might be doing research in the future. Not sure if this type of "organization" will work or not, but will try and see what happens.
 
Seeing the thread and video of the super yacht crashing (https://www.trawlerforum.com/forums/s3/watch-super-yacht-go-crash-into-dock-56452.html) made me think of a picture I saw back in ~2013 or so. It was of a Greenline 33 that had repeatedly crashed, bow-first, into a cement pier. It wasn't pretty. It was a bow-in box berth and there was no possibility for the captain to turn anywhere during the last minute of his docking process when the problem occurred.

Unlike the super yacht, with its totally electronic system, Greenline 33's have a direct mechanical linkage between the shift lever and the engine. Apparently there was a faulty-designed linkage assembly where the shift cable interfaced with the engine. This linkage could wear to the point of breaking after only a few hundred hours normal use, making it impossible to shift, as in this case, from "forward" to "neutral" or "reverse". The factory (SeaWay at the time) issued a technical bulletin and sent repair parts to all owners on record. Of course, boats change hands, etc., etc and every now and then I come across an owner of a "vintage" Greenline that is totally unaware of this lurking risk. As such, I thought it would be a good idea to post some info on this. See the attached file below from SeaWay.

The parts and design aren't complicated. In fact, my boat yard re-designed the setup to something even better than SeaWay's revised solution.
I highly recommend that any owners of early Greenlines (i.e. built ~2013 and before) take a close look at the condition of this linkage.
 

Attachments

  • PIN-rešitev 25 03 2013_Sea Way - Package Improvement for Dealers_owners.pdf
    1.4 MB · Views: 128
Last edited:
Something like this seems like a better and cleaner solution
https://www.mcmaster.com/ball-sockets/corrosion-resistant-quick-install-ball-joint-linkages/
or this one. The advantage here is that you can put as thick a spacer as required to get your cable straight from bracket to end. When tightened there should be no movement of the bolt through the control arm. Only the rotation of the spherical ball when shifting.
https://www.mcmaster.com/rod-ends/internally-threaded-corrosion-resistant-ball-joint-rod-ends/

Seeing the thread and video of the super yacht crashing (https://www.trawlerforum.com/forums/s3/watch-super-yacht-go-crash-into-dock-56452.html) made me think of a picture I saw back in ~2013 or so. It was of a Greenline 33 that had repeatedly crashed, bow-first, into a cement pier. It wasn't pretty. It was a bow-in box berth and there was no possibility for the captain to turn anywhere during the last minute of his docking process when the problem occurred.

Unlike the super yacht, with its totally electronic system, Greenline 33's have a direct mechanical linkage between the shift lever and the engine. Apparently there was a faulty-designed linkage assembly where the shift cable interfaced with the engine. This linkage could wear to the point of breaking after only a few hundred hours normal use, making it impossible to shift, as in this case, from "forward" to "neutral" or "reverse". The factory (SeaWay at the time) issued a technical bulletin and sent repair parts to all owners on record. Of course, boats change hands, etc., etc and every now and then I come across an owner of a "vintage" Greenline that is totally unaware of this lurking risk. As such, I thought it would be a good idea to post some info on this. See the attached file below from SeaWay.

The parts and design aren't complicated. In fact, my boat yard re-designed the setup to something even better than SeaWay's revised solution.
I highly recommend that any owners of early Greenlines (i.e. built ~2013 and before) take a close look at the condition of this linkage.
 
I couldn't agree more, Sean9C. It's not to difficult to improve on their "improvement".

I found I had a picture of what my yard did. The movement is now in a "ball and socket" joint (red arrow in the picture) that was designed for such movement. There is no longer any movement or wear potential on the control arm.
 

Attachments

  • R3.jpg
    R3.jpg
    176.2 KB · Views: 101
I couldn't agree more, Sean9C. It's not to difficult to improve on their "improvement".

I found I had a picture of what my yard did. The movement is now in a "ball and socket" joint (red arrow in the picture) that was designed for such movement. There is no longer any movement or wear potential on the control arm.


In my case the failure was at dockside fortunately, and the problem was that the fitting had only several threads ahead of its locknut, and stripped off. I moved the cable clamp about 3/8" fwd for a good bite, and will take another look at it soon for unusual wear. The shift mech. is quite light and smooth.
 
Has anyone thought about (or even better, implemented) a washing machine solution?

One of the most frustrating things about doing the inland route is trying to co-ordinate places that have a washing machine every week or 10 days.
 
Has anyone thought about (or even better, implemented) a washing machine solution?

One of the most frustrating things about doing the inland route is trying to co-ordinate places that have a washing machine every week or 10 days.


We looked at it every which way for our GL33 and thus far could not find a suitable solution. The most obvious location would be the locker in the companionway, but we don't want to give up that precious storage space.



We took even a harder look at trying to fit a dishwasher into the galley. While the dishwasher could be done, we did not do it, because it would have meant extensive surgery and shuffling things around and losing our beloved 270L refreigerator/freezer to something smaller.



We have found that travelling with 3 complete sets of sheets and not an unreasonable amount of clothing allows us to easly go three weeks between marinas/towns with laundry facilities. Where we're cruising now, daily attire consists of gym shorts, bathing suits or less, when we can. :socool:


We spent a summer travelling through the Mecklenberg lake district in former East Germany. Our observation was that clothing was quite "optional" during the summer for this inland cruising area...
 
Last edited:
We looked at it every which way for our GL33 and thus far could not find a suitable solution. The most obvious location would be the locker in the companionway, but we don't want to give up that precious storage space.



We took even a harder look at trying to fit a dishwasher into the galley. While the dishwasher could be done, we did not do it, because it would have meant extensive surgery and shuffling things around and losing our beloved 270L refreigerator/freezer to something smaller.



We have found that travelling with 3 complete sets of sheets and not an unreasonable amount of clothing allows us to easly go three weeks between marinas/towns with laundry facilities. Where we're cruising now, daily attire consists of gym shorts, bathing suits or less, when we can. :socool:


We spent a summer travelling through the Mecklenberg lake district in former East Germany. Our observation was that clothing was quite "optional" during the summer for this inland cruising area...



Time for a bigger boat :)

Just kidding, but only partly. These are all key additions that become easier/possible as you take steps up in size. A combo washer dryer is a game changer vs cruising from laundry to laundry. And separate washer and dryer yet another step in living convenience. Same with a dishwasher, starting with an apartment size, then full size. Of course you don’t NEED any of it, but it definitely makes life easier, and reduces the work side of cruising.
 
Additional storage (and a foot stool)

Can't claim the credit for this one because I saw similar on another GL33 a week or so ago.
We've just been shopping today for 'Euroboxes'. I got 2 boxes (400 x 300 x 220) as a trial and they fit perfectly under the steering wheel. I'm thinking about trying the 170mm high rather than 220mm and having three, then making a rebated timber lid for each one with a finger hole to allow easy removal. Cost, EUR7,45 each.

End result is more storage but also a step stool making it easier to see when docking and locking.

Cheers
 
Can't claim the credit for this one because I saw similar on another GL33 a week or so ago.
We've just been shopping today for 'Euroboxes'. I got 2 boxes (400 x 300 x 220) as a trial and they fit perfectly under the steering wheel. I'm thinking about trying the 170mm high rather than 220mm and having three, then making a rebated timber lid for each one with a finger hole to allow easy removal. Cost, EUR7,45 each.

End result is more storage but also a step stool making it easier to see when docking and locking.

Cheers


Sounds interesting! Picture? URL??
 
Helm Storage

Sounds interesting! Picture? URL??

https://photos.app.goo.gl/i8bKuHUAQZ9AYXP47

https://www.amazon.de/eurobox/s?k=eurobox

(From wikipedia)
A Euro container or KLT box (from German: Kleinladungsträger, "small load carrier") is an industrial stacking container conforming to the VDA 4500 standard. The standard was originally defined by the German Association of the Automotive Industry (VDA) for the automotive industry, but was subsequently adopted across many other areas of manufacturing and the shipping industry. The most common sizes (length × width) are 600 × 400 mm and 400 × 300 mm, which can be stacked together to fill a Euro-pallet measuring 1200 × 800 mm.
 
Last edited:
Washing machine location

I've been looking at the Daewoo mini washer dryer combo with a view to putting it in the companionway locker. I think a little bit of cabinetry changes and it should be ok. Gravity drain into the grey water tank. Something like this.

https://www.ebay.com/itm/224559242660?hash=item3448c61da4:g:5vEAAOSwARdhClNN

Not my suggestion but Belinda suggested putting it in the fwd cabin on the stbd side by replacing the wardrobe. Effectively we use one side for warmer clothes and the other for cooler clothes. We reckon we can find somewhere else for the out of season clothes. I _think_ it will fit. We only need 600H, 550W and 320D

 
Not my suggestion but Belinda suggested putting it in the fwd cabin on the stbd side by replacing the wardrobe. Effectively we use one side for warmer clothes and the other for cooler clothes. We reckon we can find somewhere else for the out of season clothes. I _think_ it will fit. We only need 600H, 550W and 320D


Looks like a nice unit!
It's difficult to look at the picture and believe it's actually as big as 600H, 550W and 320D.
Anyway, removing the starboard locker for this, I agree could work -- but it would certainly be quite a bit of surgery. Perhaps you are handy with wood.
There is certainly a good opportunity for running drain hose, supply hose and wires there.
Do share how it turned out!
 
Storage under the helm GL33

https://photos.app.goo.gl/54t14HJ4JpPhPxm99

Updated

I've very quickly become used to this. The timber is 1200 X 400 (EUR7.99) with 80mm cut off the end. Total cost EUR32 and nothing permanent.
 
Last edited:
https://photos.app.goo.gl/5NTsM71uLwr8


I've very quickly become used to this. The timber is 1200 X 400 (EUR7.99) with 80mm cut off the end. Total cost EUR32 and nothing permanent.


Interested...but link doesn't work.
 
Hello. In case you haven’t seen it, there’s a dedicated Greenline forum. Lots of discussion there, but I don’t think there is any on the 58 yet.
 
You're right Scott - serves no purpose to have two competing threads, so I'll merge them to save confusion. I think the OP just didn't realise one existed. :flowers:
 
Best Anchor for the Greenline 33

Hi everyone,
I recently purchased a used Greenline 33.
I'm not very satisfied with the anchor it carries, a 15kg Hall (?). From many photos I saw in the web it seems that the most popular anchor looks like a Danforth (15kg? ). I would be grateful if you could give me suggestions and directions for the best anchor for my new Boat.
Most of the seabeds I use to go are sandy, and some are rocky.
Thank you so much

Screenshot_20240604_090856_Gallery.jpg
 
Last edited:
Hi Geppo.
Congratulations on your GL33!
When I got my GL33 it had the standard anchor like in your photo. It seemed to be so "Mickey Mouse" to me that the first thing I did was to order a larger anchor directly from the factory in Slovenia. I'm not sure exactly the "class" it is, but see picture below. I think it is similar to Danforth. I have cruised with this for years and found it works well in mud and sand. So-so with weeds. Not so well with rocks. I also carry a light weight Fortress anchor & rode in my aft cockpit as and emergency back up and for situations where I want to anchor from the stern (In Scandinavia, it is often the case where you beach the bow and tie it to a tree on land and use an anchor for the stern). I suggest you consider ordering one from the factory, if possible, as then you will know it will work correctly with the hawsepipe, winch, etc as the dimensioning for all this can be tricky.

aftersales@svpyachts.com

Good luck and let us know how it goes!
 

Attachments

  • GL33jpg.jpg
    GL33jpg.jpg
    106.7 KB · Views: 48
Thank You Scott,
As you suggest, I'll try to contact the factory. I hope they can still help me with the GL33 even if not in production anymore.
I'll let you know the progress...
(I have also a 7.5Kg very compact folding "Bruce like" ancorh as spare and to anchor from stern as you do.. )

Grazie!
 
Hi Scott,
I just ordered the anchor ...
I'll post a photo as soon as it will be onboard
 
Remote Control for the Autopilot ST6002

Just to share with you this remote control for the autopilot Raymarine ST6002.
It looks to me a good solution not very expensive.
It was super simple to install in my configuration (Raymarine smart pilot X10) with just 3 wires to connect, and seems to work perfectly.

1717760981728.png
 
Remote Control for the Autopilot ST6002

Just to share with you this remote control for the autopilot Raymarine ST6002.
It looks to me a good solution not very expensive.
It was super simple to install in my configuration (Raymarine smart pilot X10) with just 3 wires to connect, and seems to work perfectly.

View attachment 155414
We have the same configuration (ST6002 + X10) together with a C90w MFD in our newly purchased GL33. And I wonder of this since the X10 course computer is 'born' for SeatalkNg which is much better and faster than Seatalk1. And the C90w also handles SeatalkNg.
The ST70 controller is a SeatalkNg device which will fit the, I know a little outdated, setup better. The ST70 can be found at the used things market for a reasonable price.
Another benefit of using SeatalkNg over Seatalk1 is better integration with other Nmea2k equipment, which in my case is another/pne more MFD system named Orca. Orca's core is a hub that integrates a lot of information on the bus.
 
The ST70 looks a little retro' with that antenna.. but is not expensive, and seems to works perfectly. I found at Seymo online store.
 
Hi Geppo.
Congratulations on your GL33!
When I got my GL33 it had the standard anchor like in your photo. It seemed to be so "Mickey Mouse" to me that the first thing I did was to order a larger anchor directly from the factory in Slovenia. I'm not sure exactly the "class" it is, but see picture below. I think it is similar to Danforth. I have cruised with this for years and found it works well in mud and sand. So-so with weeds. Not so well with rocks. I also carry a light weight Fortress anchor & rode in my aft cockpit as and emergency back up and for situations where I want to anchor from the stern (In Scandinavia, it is often the case where you beach the bow and tie it to a tree on land and use an anchor for the stern). I suggest you consider ordering one from the factory, if possible, as then you will know it will work correctly with the hawsepipe, winch, etc as the dimensioning for all this can be tricky.

aftersales@svpyachts.com

Good luck and let us know how it goes!
Finally I have the new anchor.. is quite big (!)
here is a pic just before mounting...
 

Attachments

  • 20240629_110101.jpg
    20240629_110101.jpg
    147.5 KB · Views: 41
Congrats! I think you will like it.
P.S. - Nice looking decks!
 
Back
Top Bottom