dang was hoping just flow through. got some pieces out but most still missing. im going to try and flush out with wet vac. thank you very much.Greetings,
Mr. w. Oil cooler will probably trap most pieces but I would check downstream from the cooler as well. IF you clean out the cooler you may be able to sorta piece back the impeller and see what, if anything, is missing.
Put the impeller on a preventative maintenance schedule so this doesn’t happen in the future. I go 2 years on them.
thanks . yep live and learn.Put the impeller on a preventative maintenance schedule so this doesn’t happen in the future. I go 2 years on them.
great information. i was thinking it may work. i cant wait to work it over with the vac. thanks again you guysI've had good luck using a wet/dry shop vac to collect impeller pcs. Alternate sucking at pump and blowing from far end of cooler, several times, until no more pcs collected.