- Joined
- Jan 9, 2014
- Messages
- 4,321
- Location
- USA
- Vessel Name
- N/A
- Vessel Make
- 1999 Mainship 350 Trawler
I modified my 12V system so that I now have:
Starting Bank: 1 x 4D (AGM)
House Bank: 2 x 8D (AGM - Wired in parallel).
Battery Charger: 50amp Charles 3 bank
The house bank takes a LONG time to recharge. It gets to around 14.1 ~ 14.2 then trickles for a long time. Too long to run an 8K diesel generator drawing 1.5 amps AC.
The three bank charger has a leg going to the generator battery, which makes no sense to me, since the generator has an alternator and the draw to start isn't that large.
Even though my house bank is in parallel, does it make sense to run a separate leg from the charger to each house battery individually?
Is there better way to charge the batteries more quickly??
Starting Bank: 1 x 4D (AGM)
House Bank: 2 x 8D (AGM - Wired in parallel).
Battery Charger: 50amp Charles 3 bank
The house bank takes a LONG time to recharge. It gets to around 14.1 ~ 14.2 then trickles for a long time. Too long to run an 8K diesel generator drawing 1.5 amps AC.
The three bank charger has a leg going to the generator battery, which makes no sense to me, since the generator has an alternator and the draw to start isn't that large.
Even though my house bank is in parallel, does it make sense to run a separate leg from the charger to each house battery individually?
Is there better way to charge the batteries more quickly??