Flybridge hard top

The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
See posts with no answers
ksanders

ksanders

Moderator Emeritus
Joined
Feb 24, 2011
Messages
6,412
Location
USA
Vessel Name
DOS PECES
Vessel Make
BAYLINER 4788
I've contracted with my local stainless steel expert to build a hard top support for my Bayliner 4788

Now it's time to decide exactly what to have him build.

What I have is an existing Radar arch. That will stay, and the hard top will extend foreward.
What I want to do is add windows on the front, and the sides. The windows on the aft part of the sides can roll up.

The idea of the hard top is/was that the stainless guy would fabricate the metal, and then I would cover the hard top with starboard like my friend did in the attached photos.

But... what if i had the metal guy just finish the job with sheet stainless steel? I need to figure out the weights but starboard isn't light, would stainless be lighter or heavier.
Would it look funky?
What would you do?

Here are some photos of my friends hard top, and some good shots of my flybridge
 

Attachments

  • IMG_3927.jpeg
    IMG_3927.jpeg
    116.7 KB · Views: 79
  • IMG_3929.jpeg
    IMG_3929.jpeg
    101.8 KB · Views: 78
  • IMG_3933.jpeg
    IMG_3933.jpeg
    132 KB · Views: 72
  • IMG_5728.jpeg
    IMG_5728.jpeg
    146.8 KB · Views: 76
  • IMG_5730.jpeg
    IMG_5730.jpeg
    153.1 KB · Views: 73
  • IMG_5732.jpeg
    IMG_5732.jpeg
    137.7 KB · Views: 79
I'd personally prefer fiberglass over stainless sheet. Easier to mount things to, and if you make it a cored fiberglass panel it would be quieter in the rain. Stainless or thin, un-cored fiberglass will be very loud when it rains. And as you mentioned, Starboard is heavy.
 
rslifkin said:
I'd personally prefer fiberglass over stainless sheet. Easier to mount things to, and if you make it a cored fiberglass panel it would be quieter in the rain. Stainless or thin, un-cored fiberglass will be very loud when it rains. And as you mentioned, Starboard is heavy.
Click to expand...
Yes, starboard is about 2.5 lbs a square foot. That's not really all that bad for my boat but... Maybe something better???

Sheet stainless or alumanium is certainly dooable but... yes it can be loud, but also once it dents, it's dented and stays that way.

Fiberglass or coosa board, with fiberglass is going to involve a custom built mold, and a ton of labor hours.

hmmm
 
Starboard isn’t structural either. Having a thin Starboard top will bend and sag unless you have a lot of metal supports, equals weight. As I remember the 4788 is a bit tender to begin with so I wouldn’t add anymore weight than absolutely necessary. I would contact Atlantic Towers. They make hardtops to fit the exact boat. I had them make a hardtop for a boat I had about 6 boats ago. They found a local boat and went and measured it so the top fit perfectly. It wasn’t structural but it was aluminum and a fiberglass top. It was well made, but not cheap.

If I were going to make a hardtop from scratch I would layup a fiberglass top using carbon fiber or something lightweight but strong. I watched a video of a guy doing just that. He made a mold and then used vacuum bagging to lay it up.
 
Last edited:
I would extend beyond the arch ~3-4' to get more shading, we did this with our Sunbrella and it looks great.
 
great idea extending beyond the arch!
 
Well, we have solved one hurdle...

The fabricator will weld a stainless plate between the tubes circled in the photo. That will provide an attachment point for the side and front windows.

Now the issue is what to use to cover it.

Nobody seems to like metal.
 

Attachments

  • IMG_5739.jpeg
    IMG_5739.jpeg
    54.4 KB · Views: 27
I went through the same process as you. I already had the framework (aluminum) in place with a canvas bimini. I was going to go with aluminum sheeting over the frames, but then discovered you could “weld” the seams/joints of starboard. I bought 1/4 inch 4 x 8 sheets of starboard-I had substantial framework, so the starboard wouldn’t sag. My plan was to mount solar on top, but found out the panels would work better with more ventilation underneath. I ended up mounting the panels directly to the frame with u-bolts.
 

Attachments

  • IMG_3861.jpeg
    IMG_3861.jpeg
    108.5 KB · Views: 38
  • IMG_3857.jpeg
    IMG_3857.jpeg
    141.7 KB · Views: 36
  • IMG_3900.jpeg
    IMG_3900.jpeg
    176.2 KB · Views: 38
Mac2 said:
I went through the same process as you. I already had the framework (aluminum) in place with a canvas bimini. I was going to go with aluminum sheeting over the frames, but then discovered you could “weld” the seams/joints of starboard. I bought 1/4 inch 4 x 8 sheets of starboard-I had substantial framework, so the starboard wouldn’t sag. My plan was to mount solar on top, but found out the panels would work better with more ventilation underneath. I ended up mounting the panels directly to the frame with u-bolts.
Click to expand...
Thanks!!!

Is welding starboard similar to plastic, where you use a heat source like a soldering iron and a filler plastic?
 
ksanders said:
Thanks!!!

Is welding starboard similar to plastic, where you use a heat source like a soldering iron and a filler plastic?
Click to expand...
It is a special tool that looks like a heat gun and you buy a coil of plastic/starboard wire. I recall it comes in different diameters depending on how thick the weld needs to be. There are commercial grade welders and cheaper versions like what I got. I never got the chance to use it, so can't verify how well the cheaper versions work. I had a commercial guy lined up in case I failed. Keep in mind, just like metal, I had the starboard edges, where I planned to weld, cut at a 45 degree angle. If you ever get to Seattle, I got a deal for you....
 
Mac2 said:
It is a special tool that looks like a heat gun and you buy a coil of plastic/starboard wire. I recall it comes in different diameters depending on how thick the weld needs to be. There are commercial grade welders and cheaper versions like what I got. I never got the chance to use it, so can't verify how well the cheaper versions work. I had a commercial guy lined up in case I failed. Keep in mind, just like metal, I had the starboard edges, where I planned to weld, cut at a 45 degree angle. If you ever get to Seattle, I got a deal for you....
Click to expand...
Thanks!
 
When you fab either the tube or the hardtop, watch the forwardmost corner. Wherever you plan to mount the glass on that spot, be sure it is AFT of a vertical line down to the corner of the windscreen or wherever the lower edge will be. If the hardtop corner is forward of the lower corner , you will have a wrinkle in the glass that will be permanent , from top center to lower outer corner.
If im not clear here, pls PM. me
 
As far as building a fiberglass top, I've thought about how to do it for my own boat without a mold. I'm thinking of making a something to give the basic arch shape and hold foam to that shape. Glass one side of the foam, flip it over and glass the rest, then finish work. Should be easier than a mold for a one off.

If you want a flat top, even easier. I've done flat foam core panels on a table with a trash bag spread across it before.
 
@Mac2
I see you used rigid panels. Did you caulk between them to stop any leaking from rain?
I have a standard bimini framework and have wondered about mounting directly on that.
 
I put hardtotop.com hardtops on several boats but I believe they went out of business during the pandemic due to parts shortage. They were a simple lightweight hardtop. You would use the bimini frame to support the hardtop. The top was made out of translucent honeycomb plastic that you attached to each other and the frame. You could get aluminum keder stripe to attach an enclosure to. I used to fabricate my own enclosures. But on one boat I had a commercial fabricator make the 7 front panels out of EZ2CY. That is amazing stuff, like looking through glass. I templated the panels and sent the templates to him and he made the panels. I had him make the middle 3 panels hinge up and hook to the bottom of the hardtop. Worked extremely well and fit perfectly. That was a bery larg hardtop and it was too heavy for the 1” S/S frame. So i had 1.25” bows made and then the hardtop was rock solid.
 
A friend covered his bimini frame with sheets of starboard like material from Lowes or Home Depot that was much lighter/less expensive than standard Starboard (with many similar characteristics). I think Starboard had a lighter version too.... like this stuff is a mix of Starboard and styrofoam. Seen to work well for him on his 45+ foot catamaran (really wide cockpit).

I had a hardtop frame with the thin fiberglass sheathing made for my sportfish. Loved it and it really wasn't all that loud as usually the wind/rain beating off the clear vinyl and boat in general was loud enough that the rain hitting the thin panel didn't matter. It was the lightest option and actually lighter than the material top which I despise on boats for maintenance/longevity. To mount a radar and crawl out to it, aluminum bars were in the frame to allow that.

After all the boats I have run and spent time on in all kinds of weather....and the boat I was going to outfit wasn't set up for a heavy hardtop. I would just use the fiberglass skin. Light, inexpensive, easy to mount/replace if necessary... no real downsides maybe except noise in a storm when I would probably be at the lower steering station for anyway. If on the bridge to watch the thunderstorm during happy hour... a slightly stiffer drink adjusts my hearing anyhow. :thumb:
 
This another boat my fabricator showed me that he had just completed.
It shows his style of construction

Now imagine how to connect side panels to this? Pretty difficult?
What we are going to do is to have him fill the gap between the two hotizontal tubes that go around the perimiter with plate stainless.

Now we have the ability to easily attach and detach when needed side panels with clear plastic glass.

The front will be the same and the slope of the front "windshield" will match the slope of my pilothouse windshield.

Now how to attach a roof?

The fabricator will weld in plate stainless in places along the perimiter, but on the inside to allow the roof to be through bolted to the structure.

As to the roof material...

I am leaning very heavially towards starboard. This stuff is indestructable, will bend to the light curve of the top, and would look nice with a 2-3" self supporting drip overhang around the perimiter.

You can "weld" starboard, but I am not totally confident with that process, and am thinking the stainless guy would fabricate a flat trim piece to be attached at the seams to assure no leaks in the rain.
 

Attachments

  • IMG_4006.jpeg
    IMG_4006.jpeg
    183.7 KB · Views: 42
  • IMG_4004.jpeg
    IMG_4004.jpeg
    211.5 KB · Views: 45
One issue with Starboard is it expands and contracts quite a bit with temperature.

Another captain used it for covering the dash of one of out 42 foot towboats and we were disappointed with the gaps/buckles and pulled screws.

Mat want to contact a distributer or manufacturer to see what their recommendations are. Some installs may be fine...but depending on singular piece size, fastening method, board thickness, and framing may all facture in.... also color. White may be far better than all other darker colors.

Not to be discouraging...just info I have come across.

Saw this on the internet...
Does King StarBoard® expand and contract? Yes, at a rate of 6×10 -5 in./degree F, changing approximately 1/32 inch for every foot of length or width over a 40-degree temperature change.

and this.....

• Use standard fasteners with oversized holes. Drill pilot holes first, followed by an oversized hole to allow for expansion and contraction.
 
SteveK said:
@Mac2
I see you used rigid panels. Did you caulk between them to stop any leaking from rain?
I have a standard bimini framework and have wondered about mounting directly on that.
Click to expand...
I used bed-it-tape (on side of frame) from 'Marine How To" along with caulk (uv stable) in the bigger gaps on top (usually at the arc). Caulk is not pretty, but it is on top and can't be seen. I had one very small leak. I believe it was the panel itself-between glass and frame. It was small and has since sealed itself. More likely dirt filled the small seam. I have 1.5 inch tubing mounted to 2.5 inch down supports and it was designed to hold snow, so the canvas wouldn't sag. The panels will have the weight listed, so you can figure out if you need to add additional support.
 
ksanders said:
You can "weld" starboard, but I am not totally confident with that process, and am thinking the stainless guy would fabricate a flat trim piece to be attached at the seams to assure no leaks in the rain.
Click to expand...
That was my plan with starboard, except I was going to use starboard strips. I would have welded the seams (probably 1/2 wide after cutting edges to 45 degrees) and put butyl tape (bed-it-tape-designed for Marine use) on top of the weld and then place the strip on top of that and use screws to hold in place (not penetrate the starboard). Starboard will sag in large gaps, but you will be able to add supports as needed. I can't recall how I found the professional plastic welder I was going to use, but it might be worth making some calls to the pros to find out their experience with starboard over time.
 
I have more information...

I just got off the phone with King Plastics, the ,manufacturer of Starboard technicial information department.

The representative told me the original King Starboard is a perfect choice, and 1/2" would be the appropriate thickness for my top.

He told me that any plastic product will expand and contract with temperature changes. The best practice for a large sheet installation is oversize holes, and to use rubber washers to seal the bolt holes against rain intrusion. He specifically recommended against counter sinking bolts to achieve a smooth look.

As far as joining sheets he recommended either mechanical bonding of the sheets to not be able to seperate, then covering with trim, or welding the pieces together with a HDPE welder, which he said is available online from a variety of sources.

He also refered me to this deflection guide which shows the maximum deflection with a single point load for various thicknesses and distance between supports.

Remember this guide is for a single point load placed dead center between the supports,

 
Last edited:
I had a Starboard hardtop on my Shamrock 26 over a 2" aluminum frame. You could crawl around on it since there were enough supports underneath. It worked out well for that boat. That top was about 15 years old when I sold it and the Starboard was getting a little weathered and hard to clean since it had become somewhat porous. My only concern would be weight, King Starboard is pretty heavy compared to a cored FRP, but if the boat isn't tender I wouldn't worry about it.
 
Ok, all the decisions are made, and the stainless steel fabricator starts Monday morning.

The frame is stainless steel 1.25" tubes. Around the perimeter are two tubes spaced 3" apart, with a 1/8" plate welded between them to attach windows, which will be made from clear plastic, trimmed with sunbrella, and attached with snaps of my choice.

The tubing will tie in to the radar arch as well, and the roof will be shaped to match the radar arch in the aft, and will overhang a distance I will choose beyond the tubing on the front and sides.

The roof will be made from three pieces of 1/2" starboard, and will be attached to the roof structure with machine screws, rubber washers, and nylock nuts. The holes in the starboard will be oversized to allow for expansion and contraction. The three pieces of starboard will be welded together using a hot air welder, and compatible HDPE rods, which I have purchased.

I will fabricate and install the windows myself, as I have experience in canvas fabrication. I will also fabricate aft windows and a door, which will fully enclose the area.

The end result is I'll add approximantly 100 square feet of enclosed living space to my boat, including the upper helm station, and two large sofas.

Photos to follow as the project progresses.
 
Seems I'm one post too late but I'll add 2c anyway.
If you search over on Cruisers Forum there were a couple of recent threads about doing a cover and a dodger. They had links to a supplier of light weight fiberglass panels that were tied down to the bimini supports to get the curve right and then had a couple of layers of mat applied to make a solid top that was then lifted off to form the edges and add attachments. After painting it looked like a professional hard top. Exposed starboard will always look like starboard, not meant to be disparaging it just won't shine.
 
NidaCore honeycomb panels Merittsupply or fiberglassflorida.com
 
I'm building a hardtop as well. Decided to use carbon-core honeycomb. 1/2 thick with factory fiberglass and gelcoat top and bottom. Panels are light and can support walking on them if needed,. To arch the 4x8 panel I cut three relief cuts on the bottom and sealed them with epoxy.
 
GB42-424 said:
I'm building a hardtop as well. Decided to use carbon-core honeycomb. 1/2 thick with factory fiberglass and gelcoat top and bottom. Panels are light and can support walking on them if needed,. To arch the 4x8 panel I cut three relief cuts on the bottom and sealed them with epoxy.
Click to expand...
I bet it weighs less than Starboard does. I like Starboard a lot but not in this application.
 
GB42-424 said:
I'm building a hardtop as well. Decided to use carbon-core honeycomb. 1/2 thick with factory fiberglass and gelcoat top and bottom. Panels are light and can support walking on them if needed,. To arch the 4x8 panel I cut three relief cuts on the bottom and sealed them with epoxy.
Click to expand...
Where did you source? I'm seeing 80lbs for 1/2" 4x8 Starboard - pretty heavy for a non-structural sheet.

Great thread - thanks for starting @ksanders - please keep us posted on your progress!
 
Agree, Starboard is too heavy in this application. Figure at least 3 sheets, that is a lot of weight up high. I patrolled Americas Cup the first year it was in San Diego aboard a 4588. It certainly knew how to roll. One crew member was sitting in a chair on the starboard side and in the blink of an eye was suddenly on the port side with the chair on top of her. It wasn’t a bad day out in the Pacific. I would want the lightest hardtop I could find up high on a 4788.
 
You must log in or register to reply here.

Similar threads

ksanders
Stainless steel work - price check???
Replies
18
Views
1K
Greg QS
Greg QS
ksanders
Flybridge enclosure - Remove windscreen or no???
Replies
13
Views
604
ksanders
ksanders
Taras
External Water Tank Level Monitor (SS Tank)
Replies
6
Views
1K
JackConnick
JackConnick
P
Leaky water heater....
Replies
21
Views
2K
kthoennes
kthoennes
T
1986 Bluewater Coastal Cruiser Stringer Rot
Replies
18
Views
938
Tcheairs
T

Latest posts

Back
Top Bottom