Just for fun, how many spare hose clamps do you have onboard?

The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
See posts with no answers

How many spare hose clamps do you have onboard?

  • More than 500.

    Votes: 0 0.0%

  • 100 to 499

    Votes: 7 20.6%

  • 25 to 99

    Votes: 17 50.0%

  • Less than 25

    Votes: 9 26.5%

  • What's a hose clamp?

    Votes: 1 2.9%
  • Total voters
    34
Dougcole

Dougcole

Guru
Joined
Jan 21, 2008
Messages
2,218
Location
USA
Vessel Name
Morgan
Vessel Make
'05 Mainship 40T
I was doing some cleaning/organizing today after finishing a small plumbing project, and realized I may have a problem. I always buy a few more clamps than I think I will need when doing a project and put the extras in my spares box. If I replace a clamp, unless the old one is obviously bad I save it too....you never know when you might need it right?

My spare clamp box is overflowing. Oddly, I am usually a minimalist type and don't do this with anything else. Well, except fishing tackle, but that's different.

Am I alone in this affliction?
 
I have well over 100, in spares, of differing sizes, but am slowly replacing the old style screw hose clamps with T-bolt hose clamps!
 
  • Like
Reactions: TJM
Good one. I too need 1 or 2 and buy 10. Still often do not have the right size, but two one inch ones joined are almost a 2 inch hose clamp.
 
SteveK said:
Good one. I too need 1 or 2 and buy 10. Still often do not have the right size, but two one inch ones joined are almost a 2 inch hose clamp.
Click to expand...
Yeah, I have done that too. You would think with how many of them I have that Magivering them would never be needed, but somehow...
 
I carry a box of them separated by size. Also a box of electrical connectors, a box of nuts and bolts, a box of sheet metal screws, a box of shrink tube and a couple of boxes of miscellaneous stuff.
 
If you buy bags of 25 off of Amazon they are very inexpensive. 25 of each 3/4, 1, 1.5, 2, 2.5 4, and 6 adds up very quickly.
 
One full engine's worth, plus a number of extras. Seaboard Marine sells full sets so I bought one. I just replaced all hoses last winter and used the set, so I bought a replacement already. It's good to know that in an urgent situation I know for sure the right one is in that bag.
 
In a pinch, the majority of hoses should have 2 clamps on them anyway, if you need a spare, pull one off the double clamped hose to get you to the next spot where you can acquire more clamps.
 
I likely have 50, including 6" 8" and 12" T bolts for the exhaust tubing's connections.
I have no box of spares.
All spare clamps are mounted snugly on the hose that they are intended to clamp. It's not uncommon to find 3 or 4 clamps on the most accessible end of any particular size of hose.
 
When I was cruising, every winter I would inventory my tools and spares. My guess is around 100 clamps with 4 of each size. I bought them in boxes of 10, and kept the rest at home. Generally a box of ten was equivalent to buying 3 or 4 at the regular price.

Every 3 years I would replace all the batteries in things like multi meters and infrared temperature gun. Hate grabbing a tool with an odd ball dead battery.

Ted
 
Actually I have 10 boxes of small parts, hose clamps, shrink tube, cushion clamps, large electrical connectors (2), electrical connectors, nuts and bolts, sheet metal screws and snaps (2).
 

Attachments

  • IMG_1058.jpeg
    IMG_1058.jpeg
    141.9 KB · Views: 17
My hose clamp collection is truly out of control. They’re in gallon zip lock bags that are bulging and threatening to burst. I can’t put a finger on how this happened…
 
slowgoesit said:
slowly replacing the old style screw hose clamps with T-bolt hose clamps!
Click to expand...
Be careful where you use those. They're great as exhaust clamps and for some other things, but they're typically wider than a standard hose clamp, so you may only be able to fit 1 on a fitting that could fit 2 regular clamps. And in some cases the bolt on the t-bolt clamp gets into something or is very easy to hurt yourself with.

A few things on my boat had t-bolt clamps when I got it where it had these issues, so I've switched some of those things back to good quality regular clamps.
 
rslifkin said:
Be careful where you use those. They're great as exhaust clamps and for some other things, but they're typically wider than a standard hose clamp, so you may only be able to fit 1 on a fitting that could fit 2 regular clamps. And in some cases the bolt on the t-bolt clamp gets into something or is very easy to hurt yourself with.

A few things on my boat had t-bolt clamps when I got it where it had these issues, so I've switched some of those things back to good quality regular clamps.
Click to expand...
Good point, I never really thought about the width of the T-bolt clamps!
 
Wow, I'm feeling woefully inadequate.
Try to have a pair in most sizes, maybe a dozen total.
 
Turtle Blues said:
Wow, I'm feeling woefully inadequate.
Try to have a pair in most sizes, maybe a dozen total.
Click to expand...
All is not lost! Amazon is available right from your computer, and they deliver! A few hundred dollars down the road, you can redeem that lost card SteveK mentioned above! :dance:
 
slowgoesit said:
Good point, I never really thought about the width of the T-bolt clamps!
Click to expand...
These are the T bolt clamps I like. They are AWAB. They are 1” wide so you have to have quite a barb to get 2 clamps on. I like that they don’t have any welds to cause the 316 S/S to rust. Everything is all 316. They have rolled edges so they don’t cut the hose.
 

Attachments

  • IMG_0437.jpeg
    IMG_0437.jpeg
    76.6 KB · Views: 10
  • IMG_0436.jpeg
    IMG_0436.jpeg
    82.3 KB · Views: 10
  • IMG_0435.jpeg
    IMG_0435.jpeg
    83.9 KB · Views: 12
In my experience: One less than I need. Fortunately this usually occurs at dockside...off to Tacoma Screw again.:cautious:
 
luna said:
I likely have 50, including 6" 8" and 12" T bolts for the exhaust tubing's connections.
I have no box of spares.
All spare clamps are mounted snugly on the hose that they are intended to clamp. It's not uncommon to find 3 or 4 clamps on the most accessible end of any particular size of hose.
Click to expand...
Another great idea luna.
 
You must log in or register to reply here.

Similar threads

T
a few words of praise for Fenner Drive linkbelt...
Replies
23
Views
2K
ABfish
A
slowgoesit
Too many spares?!?
2 3
Replies
71
Views
7K
slowgoesit
slowgoesit
Adopo
Stability and righting ability
Replies
19
Views
8K
Hippocampus
H
Sabre602
  • Locked
37' Diesel Trawler, Former Commercial Fisher - Bellingham, Washington
Replies
4
Views
5K
delirious duo
D
S
Thank you for the add
Replies
2
Views
842
sndog
S

Latest posts

Back
Top Bottom