New Toy - Hot Air Plastic Welder

The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
See posts with no answers
ksanders

ksanders

Moderator Emeritus
Joined
Feb 24, 2011
Messages
6,426
Location
USA
Vessel Name
DOS PECES
Vessel Make
BAYLINER 4788
I just tried out a very cool new toy, a Hot air Plastic welder.

As a practice I welded two pieces of 1/4" starboard together.

I Cannot break them apart. Not a chance.

Besides welding Starboard, I can repair tanks, or anything made of thermoplastic.

What would you make or repair with a cool tool like this???
 

Attachments

  • IMG_5949.jpeg
    IMG_5949.jpeg
    195.6 KB · Views: 58
  • IMG_5941.jpeg
    IMG_5941.jpeg
    153.2 KB · Views: 58
  • IMG_5946.jpeg
    IMG_5946.jpeg
    120 KB · Views: 54
  • IMG_5947.jpeg
    IMG_5947.jpeg
    46.9 KB · Views: 53
Mayberepair seams on a fake teak deck (PVC)
 
I have already thought battery box for my new Lithium batteries?
 
You can also use it to weld Vinyl Coated Polyester (think DIY inflatable boat). Tricky but doable. That's how I fabricated my anti-roll bag (the seams of which failed after hundreds of hours under stress*). But for "normal projects" it works fine.

* The topic of a future post.
 
Sibernut, I'm not sure where Kevin got his, but this is the cheapest on I was able to find on-line:

www.masterappliance.com

Master Proheat® Plastic Welding Kit

Find everything you need to fabricate and repair thermoplastics by choosing the Master Proheat plastic welding kit with tips, welding rods, welding shoe and much more today.
www.masterappliance.com www.masterappliance.com

At $455.00 plus tax and shipping, I'll not be buying it anytime soon.
It definitely looks like a neat tool, but for me, at least until I have a specific need for one, it is a solution looking for a problem!
 
slowgoesit said:
Sibernut, I'm not sure where Kevin got his, but this is the cheapest on I was able to find on-line:

www.masterappliance.com

Master Proheat® Plastic Welding Kit

Find everything you need to fabricate and repair thermoplastics by choosing the Master Proheat plastic welding kit with tips, welding rods, welding shoe and much more today.
www.masterappliance.com www.masterappliance.com

At $455.00 plus tax and shipping, I'll not be buying it anytime soon.
It definitely looks like a neat tool, but for me, at least until I have a specific need for one, it is a solution looking for a problem!
Click to expand...
I bought mine from Mcmaster Carr for about that price, along with a roll of HDPE welding rod.

For me, it is a tool that is needed to finish out my hard top. After that I'll figure out uses for it.
 
I don’t do much automotive collision work any more, and the classic cars I restore don’t have them, but modern car bumper covers are repaired using this method. Most every auto body shop has a system like this.
 
Very cool! With a leaking water or holding tank, this would sure beat the replacement cost particularly if you have access to the repair area.
 
ksanders said:
I bought mine from Mcmaster Carr for about that price, along with a roll of HDPE welding rod.

For me, it is a tool that is needed to finish out my hard top. After that I'll figure out uses for it.
Click to expand...
Why black welding rod and not white for your hardtop?
 
I have not used one in about 35 to 45 years but I built battery boxes, repaired this and that. However, like all welding projects, metal or plastic it takes some practice which I am sure all of us are aware.
They have come down in price from the 35 to 45 yr ago price of pushing over $1,000.
I used Nitrogen gas to get the best results. Air can be used successfully but not with the same results.

Protect your hands with GOOD heat resistant gloves. TH\he gas is heated to several hundreds of degrees and can burn in an instant if you are not protected.

Have fun, and I hope NOT lots of it to the point of annoying but enough to be interesting.
 
Last edited:
Mac2 said:
Why black welding rod and not white for your hardtop?
Click to expand...
I have white on the way, to be delivered on Monday. The black was a test, it came in the kit, so I thought why not give it a try?
 
You must log in or register to reply here.

Similar threads

N
Need help identifying a part in my cooling system. Detroit 8v-92TI
Replies
4
Views
678
Ken E.
Ken E.
RickyD
3208 Port engine still getting salt water into the coolant.
2
Replies
33
Views
3K
RickyD
RickyD
thead
Kadey Krogen 42PH
Replies
0
Views
1K
thead
thead
PhilPB
FOR SALE: 1983 Mainship 34' MKlll - $32,000 - Palm Beach County, Fl
Replies
20
Views
3K
PhilPB
PhilPB
B
34' Pilot Mainship 2002 twin 4LHA STP 240hp 140000.00
Replies
0
Views
2K
BB-marine
B

Latest posts

Back
Top Bottom