Search results

The lowest bridge clearance on the western Erie Canal is 15’ per the AGLCA web site which is pretty reliable. The follow on trick is to be aware of water levels which will fluctuate some. An alternative is to turn north prior to the western Erie. If you can clear a 17' bridge, you can take Lake...

Thank you, Doug. Won’t be long and you will be kicked back watching the sunset on her.

Well, we just returned from seeing the boat delivered to the marina we will do partial outfitting in. The driver pulled out on the 9th from Seattle and arrived in Iuka, Ms late on the 14th. It was fun watching the truck back the boat down to the yard (with the fly bridge perched in front), and...

That hull color really pops. Really good looking boat!

I received that ad too. Ridiculous. I also saw somewhere else that there were 800k new boaters since 2019. Lots of candidates for fleecing.

Depends on what you mean by simply mounting on the arch. You will need a top plate, or the standard mount, or something else. I wouldn’t mount directly, due to concerns about heat dissipation. There would also be some merit to having the cable gland underneath it to partially shield from rain...

The "extra" cable in the box is for connecting to another router if you dont plan to use theirs. Some peplink routers support connections to the Starlink router. I am not sure on other routers.

The cable connection at the lower end of the satellite when positioned on the mount probably needs a better water proof set up. I will fill that with dielectric grease, I think. A friend of mine received a quote back from Seaview to mount his Starlink flat panel directly above his radar. They...

Mount Images

More images The last picture should be the connector to the satellite

If this works, you should see some images.

Yes, snow and water.

I believe the reason you don’t see vents is that the vents are up higher in the boat. I think that is one of the requirements for a boat to have the “A” ocean rating.

I had an engine room heater that worked well on my previous boat. It also had covers that snapped to the exterior vent openings which was handy.

Makes sense. I will need to balance that and humidity.

Thank you. I probably wasn’t clear. That is why I am asking the question. There is a point on the spring here where we should be out of deep freezes but they can still occur.

Ok. Another question. For those who winterize their Helmsman, what do you use(if anything) to block the flow of air through the engine vents? To be clear, the same thing could go to limit the cold air flowing through the bilge when the boat is sitting in port during the winter and it gets below...

That is the one. Two “limitations”. The cable from dish to power box is proprietary and is 25 feet long. They need to make a longer one. The mount has holes that are roughly 9” apart and 5 1/4” apart. That will make it a little tougher to place on an arch. They are affected by the radar beam...

I haven’t set it up yet on the boat, but when I get home later today I will inbox and snap a few pictures.

Tom, I have the new $2,500 flat panel. The monthly charge is $135, which is the same as the RV/Mobile solution.

Yes, I have experienced the same thing. It can certainly create an issue.

That works really well with the gray. Another upvote from Lisa.

Looks nice. This is what I had in mind. Would probably go with black lettering.

Do you remember where you ordered them from?

I agree. We will use script with separated letters, large enough to see a ways off.