Search results

Would you mind sharing the model number of the fixtures you installed?

This season I went to a marina in Catskill NY they had 30 amp power. They lent me this and it worked fine. I guess I will have to purchase one.

Yes I believe it is a 50amp 250V. Ouch smart Y sounds expensive.

My boat has a single 50amp male connector. My adapter would connect to my 50 amp male but the two 30 amp ends are female and I need male ends to connect to the power pole. I am connecting to a power pole with two 30 amp female connectors. Your idea is a good one. I have a bunch of cords on...

So my new marina does not have 50 amp service and my boat requires it. I do have a Marinco Shore Power EEL "Y" Adapter but the 30 amp connectors are female and I need male connections. I really do not want to shell out $300 for a new adapter if I don't have to. Are their any other options for...

Took the trip up the Hudson in August 2019. Really enjoyed the scenery. Unfortunately we were not to stop in to many places but the ride was well worth it alone. Took on fuel at Haverstraw Marina paid roughly $2.80 a gallon!!

I also hear that you use them on your hemroids., right?

What is the best method for removing barnacles, just pulled boat and it is loaded.

My water temperature gauge is malfunctioning. When I turn on other switches such as navigation lights etc my gauge jumps 10 degrees causing the alarm to go off. I would like to wire this direct from sending unit to gauge without using a terminal. Any ideas are much appreciated.

There was debris in the strainer and my impeller was toast. Changed it and cleaned the strainer and all is well. Thanks for all that replied.

LOL yes I have mastered that part!

Yes I did all the filters.

I decided to take on the task of changing my oil in my port, starboard and Genset. This was my first attempt at doing this. My boat is equipped with the jabsco oil changing pump and it has three levers to control which engine oil you can pump out. My initial pump out was to be for the port...

I will give it a shot do not see the handle just the T-handle. Its possible it is hidden.

Its a northern lights M573k 8.0 KW, I am trying the obvious first, I think it may be water flow related. Is there a trick to unplugging those sensors?

I have a t-type seacock for my genset fresh water intake. It looks somewhat like this without the large handle in the back.* It is difficult to get to and to turn. Is there a tool I can use to help close this valve so I can service the genset?

Thanks for the replies I will start checking out the suggestions. I think it is water flow related will start there.

Manual leaves a lot left to be desired. How can I determine if I water flow and oil pressure? I do not have gauges.

I had my northern lights generator running this morning for about an hour when it suddenly shut off. I restarted it and it will only run with the pre-heat switch activated. Any ideas on what could be wrong? I checked all the fluid levels and everything is normal.

Long Island by Port Jefferson. That was a crazy storm.

Was docked at marina to fill up water tank when a squall came through, no problem I am secured to the dock NOT. The bow Cleat on the dock broke whipping the boat around we almost crushed the boat behind us as we frantically tried to untied the stern lines. We got it off, got boat started and...

I hired both a boat surveyor and engine surveyor. The boat was sea trialed at wot.

I am researching for a prop shop. I have one local but I am not sure if there work is good. Not sure what the turn around time would be? Also need to find out where I can get a haul out. I don’t plan on going faster than 10 knots or haul speed I will be well under the 2450 rpms so if I get...

Thanks for the information. Funny how my surveyor did not mention any of this as I may have been able to negotiate this to be completed before closing.

Sorry for the newbie question, I am told I am over propped not sure how that works. In my mind over propping would mean more speed. In this case I am under the desired RPM and speed? Can this wait until after the season is over when its hauled etc? The bottom was cleaned at the survey last month.