Search results

Kennedy Marine in Gulfport (228) 214-4392

This is the anode from Boat Zincs. Zinc Anode for Quick Thruster with 140mm Tunnel (MMANBTQ14000) The depth of the anode would not allow it to seat against the prop. I drilled a recess approximately 3/16" to 1/4" to allow the anode to fit over the shaft. It's not perfect. Probably the...

The anode worked with only a 10 second modification. Maybe not a good as a C Marine anode but it will do just fine. This has been an 8 month search.

I may have found an anode that will fit. Will let you know Monday.

Deep Blue Yacht offered absolutely no help at all. They would not measure the nut size inside the anoded even if I provided a couple of their part numbers to check. Probably not enough $$ in an anode sale.

Greysailor thanks for reminding me about the insulating properties of 5200. I bought the BP-195 SET 0151 anode because I was told that a 16 mm bolt would snuggly fit in the anode. The person may have used a 16mm bolt with a 22mm head when he checked the fit. I too thought it would be time to...

I need the same C Marine part number anode. I also bought the SET0151. That is the one I am trying to modify. The nut on the thruster shaft takes a 17mm wrench. The inside of the SET0151 will fit over a nut that will require a 20mm or 21mm wrench. I fabricated some aluminum shims 1.5mm...

I tried Florida Bow Thruster and Boat Zincs and gave them measurements on the anode. They had nothing to match. I did find one that is 1/4" larger in diameter (do not see a problem with larger diameter) and the recess for the prop nut was 3mm larger. I will try adding some aluminum shims for...

Does anyone have a Craftsman Marine or C Marine bow thruster? Their headquarters is in the Netherlands. If so, where do you purchase your bow thruster anodes? AER Marine in Florida was the distributor for the USA, but they no longer are associated with Craftsman. I have contacted every USA...

Try Pass Christian MS Harbor.