Search results

Think I will go with solid as well as recommended by Webasto. Got the heat wrap from amazon and after its wrapped plan on covering with the flexible metal dryer vent tubing. Fuel supply I am undecided have a free standpipe in the port fuel tank was considering using that with a good filter...

Webasto heater install So far I got the old unit out and am in design stage on a mount that will give me adequate clearance for the exhaust. I purchased from amazon heat wrap for the exhaust and then plan on covering with the flexible metal dryer vent tubing. I will get some pics to post...

I am in the process of updating the heating system in Pert 'Near a 37 Hershine. I have removed an old hydronic unit so I already have most of the components. I purchased a webasto 2010 used that was previously used on school buses in Alaska. It has been bench tested and ran great for a...

Our Hershine uses hasp padlock setup with rotating eye on the outside made of brass it appears. On the inside there is a thumb screw affair 2.5 to 3 inches long that goes thru the wall and in a receiver in the side of the door. The thumb screw is captured so it doesn't fall out when not in...

580 per month a 40x20 ft. a marina owned boathouse water incl. elec separate 30 amp service. Everett wa.

I live halfway between Seattle and Anacortes and will check to see if a I can find a unit that is compatible with my link 2000r

Is there a unit that is compatible with the link 2000r it uses a 6 wire phone cord to relay information.

Does anyone know where I could purchase or have my voltage regulator tested and repaired. I would like to have a spare on board as and I believe this one is bad (no power to the field wire)

so sorry for your loss its such a tough decision to make for one that loves so unconditionally.

56 wife 51 can see retirement in my future...or maybe I can retire early...

Upon your recommendation I found that I was turning the upper valves to the off position when trying to get a reading. They are a lever type ball valve and when the handle was lined up with the line I assumed it was open not the case . Other than feeling like a dummy I feel much more confident...

sight tubes :peace:We bought a trawler about 9 months ago. Though she is work in progress she is functional and we have taken numerous short day and weekend trips locally learning our new boat. Her twin tanks approx. 400 gallons were filled upon us receiving the boat. I have been watching the...

I have a fuel fired hydronic heating system aboard our boat. I can't find a single number, sticker, or placard ect to tell me what exactly what I have. The nearest clue I have found is on a separate fault panel that simply says Force10. After extensive internet searches I cannot come up with...

Our dogs on our trawler

Hershine Trawler I am probably not a good source of information for your questions as we have only owned/operated our Hershine since the first part of July. That being said I can say we really enjoy using ours in Puget sound and find it plenty spacious for the wife and I and our two...

I believe its an air inlet hose its about a 2 1/2 in. fabric hose goes from the heater to the exhaust port right before it goes through the hull. I will try to post pics in the morning.

I will try to get some pics up. I am not to savy on the picture posting thing.

Working on my cabin heater before I need it. New concept for me! Won't ignite unless i remove the inlet hose. natrually i suspected a blockage in the inlet but upon inspection found none. haven't been able to find much information on it and the first one i have ever owned. Its a force blue...

Where are you located in the northwest. We are in everett wa. Would like to see what you have done on your boat some time.

We just purchased our Hershine 37. A 1980 IN everett wa.

My wife and I took ownership of our 37 hershine on the last day of june. Our 1 st trawler and big step up from our 23 ft searay. After 4 days of investigating and going over our new boat, servicing the engine and fuel filters I could stand it no longer I had to try my hand at getting her out of...

Well I did get some pictures in an album. Not to tech savy but I am gonna need all the help I can get with this project.

She is in covered moorage and dry I hope to have all the exterior wood restored and sealed over this coming winter.

I thought the access from the aft stateroom to the deck was a nice feature.