Search results

Replaced my Mermaid AC Marine Air with a new one. The unit was about 8 years old but a wrongfully installed Shreader valve caused it to seize. Many good parts on the old unit. Control board, fan, condenser, electronics. Free but you pay shipping for what ever you want. hate to throw the thing...

In the old days 65-68 I used a lot of wood dust from table saws and epoxy mix to fill seams. Than applied 2 layers of 2.5oz cloth over the wet saw dust.

Don, that will make somebody very happy. I'd love to get a 39 KK but have to same some more pennies

bow thruster Did the same thing each time. I feel the 6 HP motor just raises havoc with the little screw and the plastic of the prop. I have a spare just in case, but will try some other form of fastening the prop to the shaft next spring

bow thruster I'm talking about the Schleipner bow thruster. It has only one 3/16 little allen set screw set into a detend at the end of the shaft. The torque from the 6 HP motor does a number on that little screw.

The set screw that holds the prop on the shaft has no ability to hold the prop in place. I replace 3 props in 2 years. This winter I'm having a new shaft made that will hold the prop on in a different way with a through bolt from the end.

I'm still nerved from watching you fellows right the hull. Had to go and pee but held it till you had her upright. Pretty tense...

I had the mailing address for Halversen in Australia until I changed my IP provider which caused me to loose a lot of my trawler information. Does anyone out there have a contact address for the gentleman in Australia. Thanks in advance

looking at the pictures of your ER lids/floors/decks, what kind of insulation do you have in there. Did you do it or did Halvorsen do that. I like to insulate the sound of my diesel some. Is that diamond plate aluminum under there or what. My winter project is painting the entire engine room and...

you will do just fine. Did it many times at the Yacht Constructors in Portland, OR were I build many a fine 42s and 36 sailboats

"But be aware of those older ones that can have wet saturated hulls due to compromised composite laminates below the waterline" Could you tell me a bit more about this and when did KK quit using that method of laying up fiber glass

I wanted to stay in keeping with what Halverson did in the past. Somebody had removed the plates and I just had some made based on the originals. Having the plated would not look right. They have a nice patina right now and that is the way they will stay.

it did indeed and thank you very much

just heard it is the washer for the windshield.

opportunities come along now and than. The required $quarter Mill not so much and I don't like making payments. So we look and check things out slowly. Might just take a look at the one in Canada later this year.

Some time ago I inquired about getting hold of some brass step plates for my IG. I received a picture from somebody on the list and had a model made via C&C. Found a foundry in my town that managed to cast me a number of plates which I installed on my boat and they look great. If anyone is in...

the knob over the sink is indeed the shut of for the CNG tanks. The one by the helm has me stumped. I have one of them as well and just gave up wondering about it

what a project...I build many a things in my days from my first skooter when I was 7 years old to gyro copters and fixed wing planes. But a boat inside a make shift tent under 10 feet of snow would stretch my imagination to the limits. You can be very proud of your accomplishment

must be some brokers looking at this site. Been contacted by some with offers. Don't mind that, but will restrict my search to Michigan fresh water

I just read the info on it and have the feeling the wife will fly up there soon. Looks like a nice boat and all fresh water.

My wife is pretty much in love with the Kadey Krogen 39 and 42 and I am wondering if there are any in the Great lakes regions that we could have a look at. We are based out of Spring Lake/Grand Haven with our Halverson 36 and consider an upgrade to something bigger. Not sure that's a wise move...

not so new Lost my info from a previous log on. But since I changed IP and do not have my old info I just came back as new member. Had to use new name and password. Made many changes to the old "Out of the Blue". New electronics, new AC new canvas all around and now I'm broke. But the wife is...