Search results

Need battery charger My dytek model VHD1250, onboard battery charger has bit the dust, the date code is 4895 (it has served its time well). 115v 10a, 12v 50 amp, 6 cells, I charge 3 batteries off of it. (2 gas 454’s and 1 generator battery. Does anyone have a recommendation for replacement...

wanted-garmin-210-maps How would I get in touch with them

Thanks to everyone on the help. I think the consensuses is 4 gpm and 50 psi. This has been great responses

I have an old garmin 210 chart plotter and I am looking for maps of southern US or South east

I have a 2.8 GPM, 7.5a, 45 psi shurflo fresh water pump on my 34' mainship. I have two baths and it seems if something is on there is no water pressure. I would like to replace it to increase the water pressure. I have looked at several but I'm not sure if I need to increase the PSI or...

Fresh water pump sizing I have a 2.8 GPM, 7.5a, 45 psi shurflo fresh water pump on my 34' mainship. I have two baths and it seems if something is on there is no water pressure. I would like to replace it to increase the water pressure. I have looked at several but I'm not sure if I need to...

Do you have the mounting hardware?

I think the problem I have is, it is only 500 GPH. Whats your thoughts, pull it off and start over with the March 900 GPH or run the 500 GPH to see if it can handle it?

Marine aire did not have a pump big enough in stock so they recommended to do this. I thought 1 big pump would be better. My boating buddy's said it has worked on 1 500 gph since 97 and should work again. My reply was that the new unit calls for 500 by itself and I did not want to burn up new AC

Last summer I replaced my front air with a marine aire system, I also replaced my water cooling pump with it with a 500gph. The old pump handled front and rear air. This was original equip (1997 ). The marine aire sales man said it would not handle both units so I put a y on the water coming...

Drink a few glass of a good red wine 1st, that should get rid of anything that's buggy, and if still bothers you try again, keep applying the wine until it doesn't matter anymore.

Thanks to everyone, I have flushed and reflushed and bleached and rebleached and reflushed again, tomorrow comes dawn dish washing liquid. If this doesn't work, oh well, I've been wanting to lose a few pounds. See what happens.

I the misfortune to have a a helper put about 6 ounces of stabil in my fresh water tank 150gal. Thank goodnes they realized the mistake before putting the full amount in. Any ideas on flushing it out. So far I have over flowed my water tank for about 30-45 min. Now I'm draining my water by...

Do the la people winterize your water tanks? And to what degree. I still like putting around, just don't know to what degree to winterize here in the south

I think they are 370

My mainship is equipped with marine power twin 454 gas burners, is anyone familiar with this engine. Nothing wrong just curious on performance

If your south of the Mason Dixon you know it

Got a brother and sister in law in Franklin, LA

Madison , MS on the Ross Barnett Reservoir

Sure sign things are coming to an end. Ole Miss and MS State in top ten. Were not used to winning so I don't know whether to rejoice or wait to the other shoe to drop. Either way its been great so far

On demand water heater You might want to look at a rheem prestige series 95 8.5 gal flow or a RTE 3 low flow which is a single fixture heater. All or 110v and the later is very water conscious. I have used both in home and office applications. They worked fine. As far as the scaling...

Maybe a prop shop?

No I'm not. There was a small amount of water coming in around the packing where the shaft penetrates the hull, I called him to look and he thought it was a bent shaft. I called the previous owner and asked if he had maybe hit something. He said it had always had that vibration and was not...

Shaft sizing I have a 97 34' mainship motor yacht with 454 gas burners. I have a little vibration coming from one and the service guy says I have a bent or warped shaft. No one knows what size so the mech recommended we pull he boat out of he water and pull shaft measure reinstall and order...

I am located in Madison , MS and I have a 97 34' mainship motor yacht I am very pleased to join this forum since I have many questions. Anyone please free to contact me for any discussions. I'm still kind of a newbie since I have only owned this boat for about a year. Looking forward to your post