Liberty2015
Senior Member
- Joined
- Aug 1, 2015
- Messages
- 196
- Location
- Australia
- Vessel Name
- Liberty
- Vessel Make
- 57 foot Halvorsen
Hi All,
a bit over 14 months ago we stripped back the old varnish and recoated using the Awlwood system, so I thought I would share a few photo's with you taken yesterday. Conditions could have been better just after some rain here in Sydney.
I am really happy with the finish, which is not covered and we have travelled over 3,000 miles with this since completed. We had a little shrink back ( the dimple in the grain) showed thru in an area at the bow , but other than that she is a mirror finish.
Varnishers are starting to use this here now in Australia, as you are aware we have very severe UV conditions, so gives it a good test.
a bit over 14 months ago we stripped back the old varnish and recoated using the Awlwood system, so I thought I would share a few photo's with you taken yesterday. Conditions could have been better just after some rain here in Sydney.
I am really happy with the finish, which is not covered and we have travelled over 3,000 miles with this since completed. We had a little shrink back ( the dimple in the grain) showed thru in an area at the bow , but other than that she is a mirror finish.
Varnishers are starting to use this here now in Australia, as you are aware we have very severe UV conditions, so gives it a good test.