Simi 60
Guru
- Joined
- Jul 1, 2016
- Messages
- 5,482
- Location
- Australia
- Vessel Make
- Milkraft 60 converted timber prawn trawler
Came out on Friday the 3rd
My 2 guys started on Monday
1 day off for rain
Worked through easter
Everything is done and back in hopefully tomorrow.
Bottom sanded, several meters of seams re caulked
Multiple sikaflex plugs and seam pulled and refilled
Antifouled and new anodes
Topsides sanded filled and painted
Shaft and prop slid back, cooper bearing given the once over, back of MG516 gearbox off and seals replaced, 35 litres of oil in and new filter.
Stopped for a breath of air.
Ahead of time
Under budget.
Smiles all round
And back to self isolation.
My 2 guys started on Monday
1 day off for rain
Worked through easter
Everything is done and back in hopefully tomorrow.
Bottom sanded, several meters of seams re caulked
Multiple sikaflex plugs and seam pulled and refilled
Antifouled and new anodes
Topsides sanded filled and painted
Shaft and prop slid back, cooper bearing given the once over, back of MG516 gearbox off and seals replaced, 35 litres of oil in and new filter.
Stopped for a breath of air.
Ahead of time
Under budget.
Smiles all round
And back to self isolation.
Attachments
Last edited:
