psneeld
Guru
Borg Warner model 10-17-010, ser no 13570, ratio 2.10:1
Cooler hoses on top of tranny, return line not at lower port.
Issue – Oil change….When I removed the plug from the lower port where on most models the cooler return lines attach, a spring pushed the plug out and the spring popped out.
For now, I just stuck it back in and retightened the plug as none of the exploded diagrams clearly show what I have unless that spring is holding in what I believe is a screen/filter?
Question- Is just replacing the spring and plug in any fashion OK? Any special orientation or attachment?
Cooler hoses on top of tranny, return line not at lower port.
Issue – Oil change….When I removed the plug from the lower port where on most models the cooler return lines attach, a spring pushed the plug out and the spring popped out.
For now, I just stuck it back in and retightened the plug as none of the exploded diagrams clearly show what I have unless that spring is holding in what I believe is a screen/filter?
Question- Is just replacing the spring and plug in any fashion OK? Any special orientation or attachment?