Bridge clearance for an IG32 flybridge

[Arjan]

I am looking at buying one of these and would like to know if it fits in my covered Bertha or of I would need to raise the top, does anyone know the height without the Bimini?

 

[BruceK]

Various boat dimensions were set out, for multiple models, in the Owners Manual for IGs. The Seller may be able to access the Manual for you.

 

[Comodave]

The only sure way is to measure it. Built boats can vary quite a bit from design specs.

 

[DeanOz]

Hey Arjan, mine is 5.5 metres, but as you have already been informed by those in the know, none are the same.

 

[fdw]

(For what it's worth) the 1996 Edition of Motor Yachts & Trawlers gives the IG 32 clearance as 12' 4".

 

[slacey]

I measured about 15' to the top of the Bimini on mine, but it also depends if you have a mast (mine was removed a long time ago).

 

[mrfixit48]

We have a '95 IG36 with a mast and our air draft is 20' - about 3' above our bimini so if yours has a mast, dont forget that it will be higher than your bimini too. Have seen several "oopsy"s over the years and its never pretty!!