I have a 1984 34ft CHB, just getting into fixing and replacing the deck, they used an adhesive like roofing tar and screws, my deck has delaminated and has caused some core damage, I have to pull the hole deck off and start over. I will be using a flexible adhesive and not using any screws. I am also using quarter sawn teak. The original teak is flat sawn. I am building a layout table in my shop and plan to cut all my pieces before hand. I have to steam some pieces for the bow area. I thought about a non skid fiberglass deck but decided on teak to keep the boat original as possible and I love teak, I can work with wood but not so much with fiber glass.