North Baltic sea
Guru
In this photo series how to change the pump. The new pump is SMX and trading was easy to do, for about about 2 hours and a few common tools.
Link SMX raw water pumps
http://www.sbmar.com/product/smx-qsb-seawater-pump/
The first three images from the pump to detect a leak, the pump looked good to see easily, leaking under the pump slowly, I never noticed the bilge water.
some of the pictures upside down, sorry!
Rost
Rost
Rost
Remove the cap 5 wing nuts.
Slightly loosen the 4 bolts of the pump wheel.
Vanna tensioner and remove belt out
lift pump belt and spin the other hand, the underside of the belt, so it moves away
open 4 wheel bolt and move away
drain empty, under a small bucket
4 bolts to open the upper hose
Link SMX raw water pumps
http://www.sbmar.com/product/smx-qsb-seawater-pump/
The first three images from the pump to detect a leak, the pump looked good to see easily, leaking under the pump slowly, I never noticed the bilge water.
some of the pictures upside down, sorry!
Rost
Rost
Rost
Remove the cap 5 wing nuts.
Slightly loosen the 4 bolts of the pump wheel.
Vanna tensioner and remove belt out
lift pump belt and spin the other hand, the underside of the belt, so it moves away
open 4 wheel bolt and move away
drain empty, under a small bucket
4 bolts to open the upper hose
Last edited: