Detroit powerplant opinion

The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.

dwiggl

Veteran Member
Joined
Jan 24, 2014
Messages
59
Location
USA
Vessel Name
Cady Girl
Vessel Make
Californian, Seaswirl, Brig, all others sold.
Looking at a boat with Detroit 6-71 - T1 engines:
If we proceed I will secure an expert to review the powerplant. In the mean time I would like to hear comments about these tough old powerplants.
Since opinions are like a________s, this should be fun. Thanks in advance!
 
Yes, opinions are like a__h__'s, everybody's got one. Especially on 2-cycle Detroits. I had 8v71n's, the aspirated, low horsepower model. The are loud and leak oil, but last a long time. But that's not necessarily the case of the TI engines you're looking at, turbo'd with an intercooler which create high output and correspondingly less service life. If your engines have been run hard, probably shorter life. But if they've had reasonable use, they might just last you for a while. Your problem is you don't know their history, so it's something of a crapshoot.
 
How much hp? And then how many gallons of fuel have run through them? Total hours may not be a good indicator of remaining life: lower hrs but run on the pins is not as good as higher hrs and run at hull speed.

Everyone says they have to leak, but if you take care to seal up the covers on the sides they can be pretty good. Get a survey and do a compression check if you really are concerned, but that will add to the expense of the survey.

Try this:

https://www.samsmarine.com/forums/showthread.php?1498-Genesis%92-30-Second-compression-check.


for a quick health check on Detroits.
 
My opinion of Detroit marine diesels is formed by my experience running them. They are noisy, messy and less fuel-efficient than four-stroke engines, especially those with electronic fuel management. On the other hand, DDs are reliable to the point of being nearly bulletproof, easy to service, will burn nearly anything combustible, and once started, will keep on running for as long as you supply fuel, air and lubricant.

For some reason, I've always loved the distinctive high-tempo growl of a Detroit's exhaust note, and I don't even mind their persistent scent of incomplete combustion.

If they are in a boat that checks all the rest of your boxes, I'd say buy it and budget for eventual engine replacements, but in the meantime run 'em 'til they quit.

On the subject of running on anything, my former employer operated a fleet of party fishing boats that ran nothing but Detroits. On the way in from a trip, the mate reported that the fuel tanks were nearly dry - they might quit before the boat (loaded with passengers and their freshly-caught fish) reached the dock. Over the radio, the vessel's owner instructed the mate to empty the galley's deep-fat fryer into the fuel tank. No harm done, and trip successfully completed. Try that with your modern, fancy-schmancy, electronically controlled diesel.
 
We can not form an opinion lacking one very important fact. What kind of boat and what kind of use have they had ?

A sport fisher with a charter name on the back will have lots of high RPM hours. A low speed trawler, not so much.

pete
 
Remember: you need a constant supply of electricity to keep a new electronic diesel running, but a Detroit only needs electricity to shut off......
 
Not always. My Jimmies were shut off simply by pulling the throttle fully back (after lifting a small safety lever).

They needed electric to start of course, but a spring started could have solved that also.
 
Parts, parts, parts!

Not to mention they can be easily overhauled in the frame.

I like my twin Lehman SP275s, but the DDs are beasts and ubiquitous!
 
I saw a 54’ Boat with 400hp dd 671’s in it. I have nothing good to say about that package and yet, if operated correctly there shouldn’t be anything wrong. So like asked several times already, what is the boat, what is the HP and how was it operated.
 
Turbo 71 series will go 3000 to 7000 hours on average between rebuild depending on how they were run and maintained. If you baby them like I do, clean oil and cruise at 80% of hp, then 10,000+ hours between overhauls. In a sport fisher, if you can run at 25 knots instead of 30, you should expect the higher number. If you run flat out for long hours then 1-3000 hours.

A good bypass filter in addition to the stock oil filters will ad many hours.
 
We has DDs in a previous boat. Other than the fact that they leak oil they are a good solid engine. Parts are available and are relatively cheap compared to current engines. Also any diesel mechanic can work on them. Just buy a lot of diapers...
 
DDs are reliable to the point of being nearly bulletproof, easy to service, will burn nearly anything combustible, and once started, will keep on running for as long as you supply fuel, air and lubricant.

I think pretty much all the mainstream diesels can be extremely reliable if given clean fuel and proper maintenance. However I've often thought that if you were powering or building a boat for bluewater cruising to remote locations, and didn't have backup propulsion, then a Jimmy natural would be the most reliable and trustworthy engine that you could literally bet your life on. Of course if you were building new, would you really want to install a rebuilt engine that was a minimum 40 years old?
 
Turbo 71 series will go 3000 to 7000 hours on average between rebuild depending on how they were run and maintained. If you baby them like I do, clean oil and cruise at 80% of hp, then 10,000+ hours between overhauls. In a sport fisher, if you can run at 25 knots instead of 30, you should expect the higher number. If you run flat out for long hours then 1-3000 hours.

A good bypass filter in addition to the stock oil filters will ad many hours.

I somewhat disagree here. A DD run at 80% is a 3000 hour MAX engine....potentially less. A turbo DD is a 2000 hour engine and anything after that is bonus. BUT!!!!!......any 671 run easily could be an engine that will outlast all of us.
 
I had a yard that took care of a number of party boats with Detroits. From naturals to twin turbo 12v71s. The operators that took care of their turbo engines were routinely rebuilt somewhere after 5000 hours. Myself, I've got 11,000. The hot dog operators got as little as 1000 hours.

I've used bypass filters and now a centrifuge for about 60 years covering many engines. Keeping the oil clean adds thousands of hours.
 
One of the delights of DD is by selecting the Engine cylinder count 2-71 on up the engine power and therefore service life can be selected.

20HP per cylinder is a forever engine 30 per cylinder is close..

IF the boat was built as a displacement cruiser the engine heavier weight is a non issue.

A short service life comes from a turbo engine working 100% most of its life, as on some J&T hot rod sport fish.

Most oil leaks come from indifferent service , cheap unskilled labor & poor sealants.
 
I somewhat disagree here. A DD run at 80% is a 3000 hour MAX engine....potentially less. A turbo DD is a 2000 hour engine and anything after that is bonus. BUT!!!!!......any 671 run easily could be an engine that will outlast all of us.

This is purely and simply not true. And I speak as an owner of a pair of turbo 8v92's and someone who knows a lot old DD owners (being an old Hatteras owner and aficionado) along with three top grade DD mechanics.

There is more dockside legend about these engines than just about anything, save anchors, maybe.

I should also add that they only leak if you let them.
 
Last edited:
This is purely and simply not true. And I speak as an owner of a pair of turbo 8v92's and someone who knows a lot old DD owners (being an old Hatteras owner and aficionado) along with three top grade DD mechanics.

There is more dockside legend about these engines than just about anything, save anchors, maybe.

I should also add that they only leak if you let them.

Do you run yours at 80%? No need to answer because I know you don't. I know DD people and mechanics as well. I'll be the first to say a DD will last forever in an application like your boat and the way you use it. But if you ran that thing up on plane in the upper teens all the time, then I would say it is a 2-3000 hour engine. I am making assumptions of load and the weight of your boat...but I am probably close. Run it at 9-10 knots and rust will probably kill it faster than internal combustion. A buddy of mine just rebuilt his 8v92s....Hatteras 47 SF....2200 hours. He bought the boat with "high" hours and budgeted rebuilts into the price. Very nice boat....but "high" time engines. He got it cheap.
 
I just turned 5300hrs on my 12v71’s with 650 hp. Last compression test at 4700 hrs had all 24 cyls above factory minimum. That’s 50+ hp per cylinder at WOT, but I rarely run them long above 1250rpm.
 
OP has not come back with details, so not much to add here.

Basically on a TI, TIB, TA or TAB detroit with high rating, if you run it at high power setting (like planing speed on heavy boat), they don't last that long. 1500-3000hrs is typical.

But it is not the whole engine that needs to be rebuilt, the weak spot is the piston rings above the intake ports. Just hard to get good lube in there without excessive oil consumption. And the oil that does get there does not like the heat.

Tear one down and usually everything is in excellent condition except the top rings and liner bore.

Run any detroit (NA, T, TA, TAB, TI, TIB, does not matter) at modest power setting and they will run dang near forever.

I'd just throw out an opinion: Cruise any 671 at 150hp or below and you are in the "forever" category. Run any at 350hp up and you are not. Grey area in between.

Other DD's similar if you apply a proportion to hp and displacement.
 
OP has not come back with details, so not much to add here.

Basically on a TI, TIB, TA or TAB detroit with high rating, if you run it at high power setting (like planing speed on heavy boat), they don't last that long. 1500-3000hrs is typical.

But it is not the whole engine that needs to be rebuilt, the weak spot is the piston rings above the intake ports. Just hard to get good lube in there without excessive oil consumption. And the oil that does get there does not like the heat.

Tear one down and usually everything is in excellent condition except the top rings and liner bore.

Run any detroit (NA, T, TA, TAB, TI, TIB, does not matter) at modest power setting and they will run dang near forever.

I'd just throw out an opinion: Cruise any 671 at 150hp or below and you are in the "forever" category. Run any at 350hp up and you are not. Grey area in between.

Other DD's similar if you apply a proportion to hp and displacement.
 
I’m still a DD fan and I share the same opinion as ski regarding the 671 and other DD. Oddly, one of my favorite packages is a 42’ OA with twin 400hp 453 DD. Engines fit well in the boat, 400 hp gets that boat past 20 kts, engine is inexpensive to maintain. However one needs to know if run hard this combo might only have a 1500 hour life between overhauls. Remember, everyone’s priorities are different.
 
Thanks for the opinions. Very informative. Bottom line is: confirm they were well cared for, have clear expectations that they are not modern - but dependable. And get a qualified engineer to do a complete survey.
Thanks for your help; no A____H___S in this bunch!
 
"Bottom line is: confirm they were well cared for,"

The best clue they were cared for is a decade of oil sampling results.

Troll the log book and see what RPM she was run at , or attempt to figure the GPH fuel burn on a trip..

As boats are seldom optimized, figure 15HP was created from each gallon of fuel.

10 GPH underway would be fine 30 GPH might indicate heavy-hard use.
 
Last edited:
Love them. I've had boats with 6-71's and last boat an 8V-71. Marvelous pieces of equipment. Wish the boat I had now had a Detroit in it. Naturally aspirated all. I have no opinion to offer on turboed Detroits. Run a na Detroit at 1,450 (occasionally opening them up to 1650), change the oil and filter every 150 hours and they're reasonably quiet, reasonably efficient, can be repaired with easily obtainable parts and mechanics and will outlast you. A four cycle may be a bit quieter and 10% more fuel efficient but will only last half as long if you're lucky.
 
I've been on vessels with Detroit Diesels since 1969 when I began my career at sea on northern trollers, fishing between the Mexican border and Kodiac Is, Ak.
They are one of the hardiest, most reliable diesel engines ever manufactured. Each series, 53 and 71 have 70% parts interchangeability which keeps parts prices down and easy to find world wide (well, maybe not in Russia lol).
But they are noisy and have a tendency to leak oil, however, these things would not dissuade me from purchasing any vessel with DD engines. One thing you might consider is to remove the turbos if you don't need the extra HP and don't want the added fuel consumption. There should be a plate on the engines that gives all information about the build; pistons, injectors and such. If you have a knowledgeable DD mechanic he should be able to tell you if you can go back to the naturally aspirated engine without any problems.
Good voyaging to you.
 
One of the delights of DD is by selecting the Engine cylinder count 2-71 on up the engine power and therefore service life can be selected.

20HP per cylinder is a forever engine 30 per cylinder is close..

IF the boat was built as a displacement cruiser the engine heavier weight is a non issue.

A short service life comes from a turbo engine working 100% most of its life, as on some J&T hot rod sport fish.

Most oil leaks come from indifferent service , cheap unskilled labor & poor sealants.

I agree. I had twin 4-53's naturally aspirated, with N-80 injectors that gave me exactly 20 h.p. per cylinder and if ran between 1,250 to 1,800 RPM, these engines would last a lifetime. Jake and Bertha, my Port and Starboard DD's.
 
So converting from a turbo to an NA is not as easy as just pulling the turbo off and changing injectors.
 
Back
Top Bottom