petdoc4u
Senior Member
- Joined
- Jan 14, 2016
- Messages
- 134
- Location
- United States
- Vessel Name
- EXILE
- Vessel Make
- HANS CHRISTIAN TRAWLER
I just recently had a diesel heater installed (Planar 8D). Due to the design of my boat we were able to position the exhaust only 12" above the waterline on the aft starboard side. The exhaust tube does rise some as it passes through the lazarette which hopefully would deny water reaching the heater should we be hit hard by a large wave. Is anyone aware of any type of "flapper" which can be attached to an external exhaust (1.5" approx) to prevent water incursion?
Thank you for your responses.
re: Planar heater; so far so good. Forcefully pushes copious hot air.
Thank you for your responses.
re: Planar heater; so far so good. Forcefully pushes copious hot air.