magna 6882
Guru
- Joined
- Apr 20, 2020
- Messages
- 720
- Location
- USA
- Vessel Name
- Intrepid
- Vessel Make
- North Pacific/ NP-45 Hull 10
I installed a couple of plugs for 12v down riggers. I wire two circuit breakers with 8g then ran the hot line with 10g. My question is the ground. I found that each side of the boat had all the thru hulls connected with a number 8g green wire. I also noticed the galvanic isolator was wired with with 8g wire.
I was thinking tonight that with two systems AC and DC do i need to rethink where i picked up the ground leg for the 12v down riggers?
I was thinking tonight that with two systems AC and DC do i need to rethink where i picked up the ground leg for the 12v down riggers?