crashley
Veteran Member
HI our boat has just gone back into the water after a week on the slip
it came out for a quick antifoul and anode change but a bit of damage to the keel needed to be repaired A piece of the keel slipper was removed and a bit of damage to the keel was revealed so a new section of keel ( about 6 foot long and 2 inches thick ) was fitted along with about 8 foot of slipper keel so after this was finished new anodes new prop speed paint on the prop and new antifoul it was relaunched and back in its berth
now just have to finish the new gas system and all will be finished
it came out for a quick antifoul and anode change but a bit of damage to the keel needed to be repaired A piece of the keel slipper was removed and a bit of damage to the keel was revealed so a new section of keel ( about 6 foot long and 2 inches thick ) was fitted along with about 8 foot of slipper keel so after this was finished new anodes new prop speed paint on the prop and new antifoul it was relaunched and back in its berth
now just have to finish the new gas system and all will be finished