Mainship Pilot 30II

[Kelsey]

I was wondering if it is possible to obtain assembly drawings for my Mainship Pilot so I can plan some maintenance. I need to fix leahs coming from the gunnels, rails etc ( not sure) BUT IT WOULD BE GOOD TO SEE HOW THEY ARE CONSTRUCTED BEFORE I START removing anything.

 

[DavidM]

Mainship never provided the kind of drawings you want when they were in business, much less now. But talk to a good shipwright at a boatyard. All fiberglass boats are built pretty much the same and he could give you some advice based on experience.

David

 

[Bacchus]

Take a look at my Bacchus website in the Projects area and scan for repair of Hull / Deck Joint.

http://dkloeber.wixsite.com/bacchus

http://dkloeber.wixsite.com/bacchus/project-pg-4
I tried to sketch and summarize what I found and repaired. It also includes links to some other worthwhile sites w/ actually as l MS photos that I found helpful.
Happy to answer any specific questions. There are others here on TF that have tackled this job.
Also other threads about this I believe in the Marlow MS builders section