Ftbinc
Senior Member
- Joined
- Sep 12, 2016
- Messages
- 143
- Vessel Name
- Oma
- Vessel Make
- Kadey Krogan\Manatee
Hi:
Now I have a 2nd question; The bulkhead between the two below deck spaces - what is it made of and how thick is it? I have a water filter that I would like to mount on that surface, but I really don't want to put a hole in a fuel tank...
Ideally, I would like to mount the water filter system there. (The PO, just had a 10" filter laying in the equipment space bilge. (I replaced the entire filter and thought about mounting it, but then thought better of it until someone can give me some guidance. My basic thought would be to mount a "mounting board" to mount things like this (Including the Filter Wrench, and other tools needed in this space) with several short screws (The bulkhead is covered with 10x10 sound panels.
Any guidance would be appreciated.
Thanks
Paul
Now I have a 2nd question; The bulkhead between the two below deck spaces - what is it made of and how thick is it? I have a water filter that I would like to mount on that surface, but I really don't want to put a hole in a fuel tank...
Ideally, I would like to mount the water filter system there. (The PO, just had a 10" filter laying in the equipment space bilge. (I replaced the entire filter and thought about mounting it, but then thought better of it until someone can give me some guidance. My basic thought would be to mount a "mounting board" to mount things like this (Including the Filter Wrench, and other tools needed in this space) with several short screws (The bulkhead is covered with 10x10 sound panels.
Any guidance would be appreciated.
Thanks
Paul