rsn48
Guru
- Joined
- Feb 18, 2019
- Messages
- 2,019
- Location
- Canada
- Vessel Name
- Capricorn
- Vessel Make
- Mariner 30 - Sedan Cruiser 1969
Slowly my boat will be finished refit. The new Merc 6.2 L 350 hp stern drive motor and B2 leg have been installed, the motor tested but items still have to be hooked up.
I notice a setting on the throttle I've never seen or used before called "dock." Somehow it gives a better response at lower speeds and RPM's for obvious "docking" purposes.
Here's a link to the throttle, you can clearly see the dock button:
https://www.mercurymarine.com/en/ca/gauges-and-controls/single-engine-controls/console-mount/
Has anyone had experience with the dock setting with a Merc throttle, is it hype or does it work?
I notice a setting on the throttle I've never seen or used before called "dock." Somehow it gives a better response at lower speeds and RPM's for obvious "docking" purposes.
Here's a link to the throttle, you can clearly see the dock button:
https://www.mercurymarine.com/en/ca/gauges-and-controls/single-engine-controls/console-mount/
Has anyone had experience with the dock setting with a Merc throttle, is it hype or does it work?