MS 350/390 genset fuel pickup tube

[gerilla]

I have a 99 350 with the standard 158 gal tanks on each side of my twin engines. Has any one here have any idea how far from the bottom of the starboard tank is the genset fuel pickup tube? I know by design that it is shorter than the main engine pickup in order to not use ALL of the fuel in the starboard tank and strand the boat. Maybe someone has an old Florida Tank schematic or have cut into the tank for cleaning or removal purposes.
Thanks everyone for reading this and thanks for all the informed comments and opinions over the last few years.

Glenn

 

[rgano]

Here is the nameplate data from the tanks in my 30 Pilot II which might help you to contact the tank manufacturer.

 

[gerilla]

Here is the nameplate data from the tanks in my 30 Pilot II which might help you to contact the tank manufacturer.

My tanks were made by Florida Tank who are now located in SC (?) I believe. I may check with them if no one here knows for sure. Thanks rgano for the reply.