Oil Gypsy
Veteran Member
- Joined
- Sep 25, 2019
- Messages
- 55
- Location
- Canada
- Vessel Name
- Dauntless
- Vessel Make
- Grand Banks 36 Classic #248
On my boat the oil Pressure Senders are installed directly above the alternator with a flexible tube back to the sensor take off on the block. The low oil pressure sensor is tied into this arrangement with a "T". Apparently this was the original installation which seems a bit sketchy, with any leak dripping onto the alternator.
I am planning to change this setup and without re inventing the wheel would like to know if anyone has changed this arrangement and if so could you share the design.
Thanks in advance
Bill
I am planning to change this setup and without re inventing the wheel would like to know if anyone has changed this arrangement and if so could you share the design.
Thanks in advance
Bill