angus99
Guru
I'm finally getting ready to install some new electronics including Furuno doppler radar and two TZTouch2 MFDs. I have to confess that I bought the two MFDs without a clear idea of where I'd install them. The only certainties are that they will not be built in--but will be installed with brackets--and that I won't have more than two MFDs.
I'm trying to decide whether to mount one MFD on each helm or install two sets of brackets at each helm and move the MFDs depending on which helm we're running the boat from. I'm guessing that having two screens per helm would reduce clutter if I have radar on one and GPS/sonar on the other. (I also don't know what's possible using an iPad to mirror or augment the MFDs.)
Would appreciate any recommendations for how the MFDs can be installed optimally.
I'm trying to decide whether to mount one MFD on each helm or install two sets of brackets at each helm and move the MFDs depending on which helm we're running the boat from. I'm guessing that having two screens per helm would reduce clutter if I have radar on one and GPS/sonar on the other. (I also don't know what's possible using an iPad to mirror or augment the MFDs.)
Would appreciate any recommendations for how the MFDs can be installed optimally.