Phasor Generator 3.5kw

[SailorGoneBad]

I was hoping to take the kids on the Boat Lights Parade on the Saturday after Thanksgiving but when I started the generator today to make sure everything was working and I had no power. The generator started just fine like it always does and runs as normal just no output. So far all I have done is check the circuit breaker (obviously that is not it) Any quick trouble shooting ideas would be greatly appreciated. The manual is pretty brief and has no trouble shooting steps

Generator has about 150 hrs on it and has never given me any trouble.

Thanks.

 

[mmullins]

I did the same thing this weekend. Did you happen to make sure the circuit breaker on the top right side of the generator is in the "on" position?

 

[Jc180]

I forgot to switch from shore power to ships power on transfer switch. Same result.

 

[SailorGoneBad]

Solution! Parade is a GO!

It turns out the LED lights did not draw enough to get the generator to kick on. As soon as I added a small fan to the load everything worked as usual.