silentfaith
Senior Member
hiall,,,,,has anyone ever used the transducer from the old round datamarine depth to another older raymarine st40 depth?????? cable ends differ but there might be a way. need help here.
remove datamarine depth-add raymarine depth
- Thread starter silentfaith
- Start date
The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
Gabe n Em
Guru
look at the 'ducer itself and get a model number. Or look it up from your original paperwork. you can check 'ducer compatibility. Sometimes new ends can be purchased online and spliced in carefully.
Take a look on the Airmar site. They make most of the transducers out there and usually have good customer support. Here's their cross reference guide.
Airmar
Airmar
caltexflanc
Guru
What's wrong with the DM finder? Great units and repairable.
OldDan1943
Guru
- Joined
- Oct 2, 2017
- Messages
- 10,663
- Location
- USA
- Vessel Name
- Kinja
- Vessel Make
- American Tug 34 #116 2008
Alas, my AirMar 20-635-01 is not on the list. Guess I will have to call them.
tiltrider1
Guru
- Joined
- Aug 2, 2017
- Messages
- 4,991
- Location
- Pacific North West
- Vessel Name
- AZZURRA
- Vessel Make
- Ocean Alexander 54
Airmar makes most the transducers. Most the transducers are the same and only the plugs are different between electronic venders. Most transducer cables can be cut and the correct plug can be connected by butt splice or terminal strip. With tridata transducer the dept data is not an issue but speed and temp don’t inter change very well, it’s a case by case basis.
Everyone will tell you you can’t interchange transducers and that you can’t cut the plug yet they will all sell you an airman junction box which is nothing more a water tight terminal strip.
Everyone will tell you you can’t interchange transducers and that you can’t cut the plug yet they will all sell you an airman junction box which is nothing more a water tight terminal strip.
Robvald
Veteran Member
Agreed . Their customer service is great. I trust my DM depth finder as much as my brand new MFD function. It’s the only piece of electronics that I kept on the boat from P.O. late 70’s package.
silentfaith
Senior Member
So, what i'm going to do is leave the dm depth in place and remove the dm speed and take out the spin wheel through hull and put in the st40 depth transducer shorty then i will have two depth readers along with two e80 plotters.
Similar threads
