Alaskan Sea-Duction
Guru
- Joined
- Jul 6, 2012
- Messages
- 8,084
- Location
- USA
- Vessel Name
- Alaskan Sea-Duction
- Vessel Make
- 1988 M/Y Camargue YachtFisher
OK TF experts need help troubleshooting my genny temp gage.
Basic info: Onan 8 MDKD-3CR/2650B, Ser# 1870947950
It would also appear the engine part of the genny is a Kubota. The manual isn't much help in troubleshooting the gage.
The temp gage is located in the control box on the genny. The control box is a rats nest as far as wires etc. If needed I will take it apart to get the gage out. So here is the question:
How do you troubleshoot to find out if it is the gage or the sending unit?
Thank you in advance!
Basic info: Onan 8 MDKD-3CR/2650B, Ser# 1870947950
It would also appear the engine part of the genny is a Kubota. The manual isn't much help in troubleshooting the gage.
The temp gage is located in the control box on the genny. The control box is a rats nest as far as wires etc. If needed I will take it apart to get the gage out. So here is the question:
How do you troubleshoot to find out if it is the gage or the sending unit?
Thank you in advance!