Window tint removal
- Thread starter Fishsail
- Start date
The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
Greg QS
Senior Member
- Joined
- Sep 1, 2022
- Messages
- 397
- Vessel Name
- Quiet Storm
- Vessel Make
- Nordlund 61
Oh you are going to have fun.
Get a flat razor blade scraper. I like the screw driver type.
remove all.
Depending on what is there the hardest part is removing the left over glue residue. Acetone or Lacquer tinner I have used. Just cover surrounding areas and ware gloves.
Get a flat razor blade scraper. I like the screw driver type.
remove all.
Depending on what is there the hardest part is removing the left over glue residue. Acetone or Lacquer tinner I have used. Just cover surrounding areas and ware gloves.
Always Late
Veteran Member
- Joined
- May 27, 2020
- Messages
- 96
- Location
- USA
- Vessel Name
- Always Late
- Vessel Make
- Marine Trader 44 DC
On mine I just picked a corner loose and peeled it off. Then cleaned residue off with Windex. Guess it depends on how it was put on.
Comodave
Moderator Emeritus
- Joined
- Jul 2, 2015
- Messages
- 22,093
- Location
- Au Gres, MI
- Vessel Name
- Black Dog
- Vessel Make
- Formula 41PC
You might use a heat gun on low.
PennBruce
Senior Member
- Joined
- Apr 12, 2021
- Messages
- 208
- Vessel Name
- Last Hurrah
- Vessel Make
- Ta Chiao/CT35 Sun Deck
I used a hand held steam gun.
Bruce
Bruce
