J.T kearney

dito that psneeld, remove the bow light clamp and use velcro to attach to bow of inflatable. The unit breaks down that will fit into a...

Still learning a lot on this thread. From what I've read, the DC to DC charger is similar to an ACR that it wont forward any power...

Also should mention that when I'm anchored or on a mooring ball the start battery is always switched off, so no draw on battery. On...

SteveK, Thats the way mine is set up with a switch to combine both banks to transfer power from house to start, but have not needed too...

I 2nd that, copper tubing supported every 12 inches. Make sure your filter is easily accessible or it won't get changed Cheers J.T.

C Duck, how much room did you have above the tank to install the sending unit ? I've got about 2 to 3 inches below the port side steps...

ERTF, this subject has worked over pretty well on the TF. I switched to lifpo4 this winter and so far very happy with it. We pulled...

Hi all Finally returning to the thread, sorry for the delay. Decided to go with vulcan 25 kg , 100 ft 5/16 g4 chain and 250 ft of 5/8...

Lshulan, my 98 350 has a port or starboard tank switch because there's only one gauge at the helm stations. There's also and upper and...

Edward, thank you that is great information that I needed to know. I'll try to get the wire extension crimped and heat shrink tubing put...

Thanks for the quick response, We have about 1 month to get every thing together. Purchase a sleipner es 55c on closeout from imtra for...

going to install a sliepner/ side power stern thruster next month on my mainship 350. Saw your posts but looking for more detail. Wiring...