Search results

I’ve reviewed previous posts related to stern tie methods but would be interested in suggestions for the amount of rope that would cover most situation in the mid coast / desolation sound area. I currently have a reel of 320’ of 1/2” poly. I’m considering replacing it with more of 3/8”. The boat...

I’m planning to use Semco natural on teak cabin top handrails as an alternative to varnish. Does Semco stain gel coat? It will be very difficult to cover all surfaces of the rails without getting some on the cabin top even if I mask off. Is this a concern?

I’m modernizing a late 80’s Nordic Tug that cruises in the inside waters of BC. The boat came to me with a Cybernet Depth Finder that works most of the time but does not provide me with the level of confidence that I need. So I’m looking for suggestions on a new system. I’ll probably leave the...

Is anyone using this App? Comments? Application to the BC Coast?

I am working on a late 80's Nordic Tug that came to me with a Cybernet CDF-500 Marine Depth Finder. I can't find any information on these units so assume that they are no longer made. The attached pics show the inside of the transducer and the transducer plug. While the sounder works reasonably...

Looking for recommendations for an alternative to varnish for teak handrails on a Nordic Tug. They are difficult to fully sand and refinish with multiple coats of varnish so I'm exploring a strip and sand with an oil finish. I can live without a high gloss finish on these parts. What are your...

NT 26-120 but probably similar on other trawler hulls. I don’t currently have a problem but would like to get at the pump when needed. The pic on the left shows the rear of the bilge just in front of where the shaft tube exists (prop to the left). The large white hose on the left is the intake...

I posted recently asking for information on a Cybernet depth sounder. Not getting any responses on this and other forums suggests that they are either rare or have been off the market for some time. My question here is about the through hull transducer. The first pic shows the unit as it sits in...

Is anyone familiar with the Cybernet Marine Depth Finder? I have a number of questions but will wait as I understand that these not very common today. I have the CDF-500 that is probably from the late 80's early 90's.

Can someone explain the function of the water hose on this type of shaft seal? I understand the “packing” type of seal and its adjustment but don’t understand the reason for the water inlet in the shaft tunnel. The black hose connects to a dedicated through hull.

I recently bought a Nordic Tug 26 that does not have a pressure wash down system. I would like to add one for both anchor and cockpit wash down. I can tap off the toilet inlet through hull, install a 12V pump with quick change outlets at the bow and stern, but I was wondering if anyone has used...

Recently purchased a Nordic Tug 26. Based in Comox BC. Looking forward to contributing.