Lshulan
Senior Member
- Joined
- Jan 10, 2022
- Messages
- 156
- Vessel Name
- Voyager
- Vessel Make
- Mainship 390
Does anyone have access to an electronic copy of the owners manual for a 2000 or close 390?
Owner’s Manual for 2000 390
- Thread starter Lshulan
- Start date
The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
Cartouche
Guru
- Joined
- Dec 17, 2017
- Messages
- 503
- Location
- Canada
- Vessel Name
- On The EdJ
- Vessel Make
- Former 390 owner now Sundancer 380
More schematics. when I scanned the Schematics I had to do in 2 pages as my Scanner is only 8.5 X 11 and they are 11X 14 when you tape them together, I think that's the lot cheers
OP
OP
Lshulan
Senior Member
- Joined
- Jan 10, 2022
- Messages
- 156
- Vessel Name
- Voyager
- Vessel Make
- Mainship 390
Mainship 390 manuals.
Thank you so very much, greatly appreciated. Will save and print as needed. Very helpful. Buying a 2000 390, under contract but not yet surveyed, trying to get more familiar and this is a great help. Thanks again
Thank you so very much, greatly appreciated. Will save and print as needed. Very helpful. Buying a 2000 390, under contract but not yet surveyed, trying to get more familiar and this is a great help. Thanks again
Cartouche
Guru
- Joined
- Dec 17, 2017
- Messages
- 503
- Location
- Canada
- Vessel Name
- On The EdJ
- Vessel Make
- Former 390 owner now Sundancer 380
You are most welcome if you have any questions let me know they are a great boat, we pulled out the couch and replaced with 2 rocker recliners, makes more space and we love the look. (along with a Myriad of other improvments.
OP
OP
Lshulan
Senior Member
- Joined
- Jan 10, 2022
- Messages
- 156
- Vessel Name
- Voyager
- Vessel Make
- Mainship 390
Appreciate your help
I will prob have a lot of questions but didn’t think the forum was the right spot, I tried to private message you but that didn’t work. Not sure if there’s a setting to change. Anyway, where are you located? What year is your 390?
I will prob have a lot of questions but didn’t think the forum was the right spot, I tried to private message you but that didn’t work. Not sure if there’s a setting to change. Anyway, where are you located? What year is your 390?
OP
OP
Lshulan
Senior Member
- Joined
- Jan 10, 2022
- Messages
- 156
- Vessel Name
- Voyager
- Vessel Make
- Mainship 390
Oh, just re-read your first message, I see year and location. I’m on Barnegat Bay in NJ, wondering if any 390 owners around?
Cartouche
Guru
- Joined
- Dec 17, 2017
- Messages
- 503
- Location
- Canada
- Vessel Name
- On The EdJ
- Vessel Make
- Former 390 owner now Sundancer 380
Yes as you can see we are at the bottom of the Rideau Canal, Heading up tomorrow. if you have any questions let me know jbilling@cogeco.ca Cheers
I couldn’t open any of the owner’s manual downloads. Somewhere I found a diagram showing ever single item on the boat but it printed all screwed up and now I can’t even find where I printed it from. I’m trying to find the A/C cooling pump that won’t work
I couldn’t open any of the downloads. I’m trying to find where the A/C cooling pump is. One member said the starboard hatch near the front.
Cartouche
Guru
- Joined
- Dec 17, 2017
- Messages
- 503
- Location
- Canada
- Vessel Name
- On The EdJ
- Vessel Make
- Former 390 owner now Sundancer 380
AC Cooling pump on ours was on the forward Bulkhead in the engine compartment on the Starboard side. we had a single Yanmar but I would think the location would be the same for twins. Try Filling the strainer until it overflows and then start AC/Heat - pump distributes to both units. if That fails Pour water from the Forward AC Through Hull outlet On port side Under Stateroom window, it will flow back through the pump, and get rid of any air lock.
We are selling our Mainship and looking for a Sundancer 340 if you know of one. My wife can’t deal with slow speeds. My Bertram got us to Kingston and the trawler took about 4 hours! Thanks, Dan Mossien. D.mossien@mossien.com
