Navigation

Browse albums

Media

The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
See posts with no answers
Spencer Spit 1

Spencer Spit 1

  • 0
  • 1
IMG00136

IMG00136

  • 0
  • 1
116 1609 IMG

116 1609 IMG

  • 0
  • 1
113 1381 IMG

113 1381 IMG

  • 0
  • 1
103 0310 IMG

103 0310 IMG

  • 0
  • 1
FACEBOOK006

FACEBOOK006

  • 0
  • 1
IMG00040

IMG00040

  • 0
  • 1
IMG 20150826 200408605 HDR

IMG 20150826 200408605 HDR

  • 0
  • 1
IMG 2127

IMG 2127

  • 0
  • 1
IMG 2161

IMG 2161

  • 0
  • 1
IMG 2130

IMG 2130

  • 0
  • 1
IMG 2153

IMG 2153

  • 0
  • 1
IMG 2141

IMG 2141

  • 0
  • 0
Bilge pump controller

Bilge pump controller

  • 0
  • 0
IMG 20151009 165552

IMG 20151009 165552

  • 0
  • 0
This is the old panel laid over the rough cut of the new panel. It came out close but not exact.

This is the old panel laid over the rough cut of the new panel. It came out close but not exact.

  • 0
  • 0
I failed miserably using the binding feeder. It does a good job but somehow I kept getting out of sync and had to do repairs that are now obvious. (

I failed miserably using the binding feeder. It does a good job but somehow I kept getting out of sync and had to do repairs that are now obvious. (

  • 0
  • 0
When I was as close as I was going to get, I stitched the outside edges to hold them together. You can sew right over the staples (I try to avoid the

When I was as close as I was going to get, I stitched the outside edges to hold them together. You can sew right over the staples (I try to avoid the

  • 0
  • 0
My trusty LSZ-1 set up on two 6' folding tables. This gave me a large enough surface to work easily. I have also set it up on the table in the sailb

My trusty LSZ-1 set up on two 6' folding tables. This gave me a large enough surface to work easily. I have also set it up on the table in the sailb

  • 0
  • 0
I backed the panel with cut pieces and used double edge tape at the center hold them. I stapled the outside since I cut it large so I can mark the fi

I backed the panel with cut pieces and used double edge tape at the center hold them. I stapled the outside since I cut it large so I can mark the fi

  • 0
  • 0
Checking the new panel with the old.

Checking the new panel with the old.

  • 0
  • 0
Cutting out the new panel. I used Sailrite's 24oz boat topping.

Cutting out the new panel. I used Sailrite's 24oz boat topping.

  • 0
  • 0
I laid the vinyl (removed from old panel) on the new panel to make sure I got it right. (Well, I got it close)

I laid the vinyl (removed from old panel) on the new panel to make sure I got it right. (Well, I got it close)

  • 0
  • 0
20151008 175930[1]

20151008 175930[1]

  • 0
  • 0
20151009 153604[1]

20151009 153604[1]

  • 0
  • 0
Back
Top Bottom